NIKON-TRIMBLE CO. LTD. NT0002 사용자 설명서
3 Getting Started
24 Total Station Nivo Series Instruction Manual
Cleaning of touch screen
Tapping the menu button [Clean Touch Screen]
disables the touch screen. Use this menu button
for cleaning the touch panel.
disables the touch screen. Use this menu button
for cleaning the touch panel.
Press
(Enter) key, and the display returns to
the screen shown before pressing [Power] key.
Adjustment of touch screen
Tapping the menu button [Adjust Touch Screen]
shows the touch panel adjustment window.
shows the touch panel adjustment window.
By following the instruction in this window, a
gap between the actual tapping point and button
on the window will be corrected.
gap between the actual tapping point and button
on the window will be corrected.
Press [+] (plus) sign on the screen by stylus pen
over 1 second. The [+] (plus) sign will move to a
corner of the screen when you remove the stylus
pen. Pressing
over 1 second. The [+] (plus) sign will move to a
corner of the screen when you remove the stylus
pen. Pressing
(Enter) key after you press
[+] (plus) sign on center and four corners completes the adjustment of touch screen.
Press [ESC] key to cancel the adjustment.
Reset
Tap the menu button [Reset], and the window
shown on the right is displayed.
shown on the right is displayed.
[Reset] stops the program in process and
initializes the Total Station. Use this menu when
the application program does not run normally
because of an unexpected reason.
initializes the Total Station. Use this menu when
the application program does not run normally
because of an unexpected reason.
Tap [Yes] button to execute Reset.
Tap [No] button to cancel Reset and return to the
screen shown before pressing [Power] key.
screen shown before pressing [Power] key.
Note – Once the Reset is executed, data that are not stored in the application program
will be lost.
will be lost.