Lat-Lon LLC LL13 사용자 설명서
Lat-Lon, LLC
STU Website Users Manual
Page 14
Units
The first column listed is “Unit Id”. This is the Lat-Lon serial number(s). To rename the Unit Id to
an asset number or a name click the EDIT button displayed on each line. This will allow you to
update the Unit Name and also add a note as shown below. Once finished, press the Update button
to save changes.
an asset number or a name click the EDIT button displayed on each line. This will allow you to
update the Unit Name and also add a note as shown below. Once finished, press the Update button
to save changes.
How to Change Move-time Reporting frequencies:
You are able to submit configuration changes anytime, but STUs are only listening for
configuration changes when they are reporting. So, if your unit is not moving and reporting Timed
Reports every 2 hours, then it will accept the configuration changes when it reports the Timed
Report.
You are able to submit configuration changes anytime, but STUs are only listening for
configuration changes when they are reporting. So, if your unit is not moving and reporting Timed
Reports every 2 hours, then it will accept the configuration changes when it reports the Timed
Report.
Click “Configure” on the right side of each unit’s line.
Administrators are able to change the “Time between Move-timed Reports” up to every 10 minutes
or 600 seconds.
See picture below.
Administrators are able to change the “Time between Move-timed Reports” up to every 10 minutes
or 600 seconds.
See picture below.