E-TECS LIMITED 9ET-TX 사용자 설명서

• Please read the following instructions and safety warnings before you 

    install the Video Monitor.

• Please retain these instructions for future reference

• Tool needed: Screwdriver (not included) for mounting the camera on 

    the wall if needed

• Additional camera(s) (sold separately).

Strangulation Hazard - Children have STRANGLED in cords.

Keep this cord out of the reach of children

(more than 3 feet (0.9 m) away).

• Do not place the Camera or AC adaptor cord within reach of children.

• Do not place the Camera or AC adaptor cord in, or attach it to, a crib or 

   playpen.

• Always fasten the AC adaptor cord of the Camera on the wall with

   the security clips provided.

• Never use extension cords with AC adaptors. Use only AC adaptors 

   provided.

• Adult assembly is required. Keep small parts away from child’s reach.

• This product is not a toy. Do not allow children to play with it.

• This Video Monitor is not a substitute for responsible adult supervision.

• Test the Video Monitor and all its functions so that you are familiar 

   with it prior to actual use.

• When the power adaptor is plugged into an electrical outlet, do not 

   touch the exposed end.

• Li-ion battery is built into the product.

• Charge the product by the designated charging method.

• Do not place the product in or near fire, or put the product in a microwave.

• Do not expose the product to high temperatures above 140 F.

• Do not disassemble the product.

• Do not expose the product to excessive shock  such as drooping from a 

   high place.

• Keep the product dry.

Your Video Monitor is able to switch from Portrait to Landscape view, 

simply place the Monitor in the upright position for Portrait View and lay 

it on its side for Landscape  View. Note: There is a one second delay when 

switching views, this is a normal function.
Night Vision Mode

The Camera features 6 Infrared LEDs around the lens designed to capture 

clear images in dark environments or at night. When the Light Sensor 

detects low light levels, the Night Vision Mode will automatically activate 

and the video shown in the Monitor will display in black and white.
Charging the Battery

Your Video Monitor has an internal, replaceable, 2100mah lithium-ion 

rechargeable battery. Charge the battery by connecting the Monitor to a 

power outlet using the power cord provided.
Video ON/OFF

This feature allows you to turn the video screen OFF while maintaining the 

audio monitor ON. Simply press the Video ON/OFF key to turn the video 

screen ON or OFF.

1. Connect Camera to AC outlet
2. Camera works automatically.
3. Disconnect the power from the camera, 
    camera automatically switch off.

Put the camera on a flat area or hang it on 
the wall, see the Demo.

Camera paired (Default)
The baby monitor is already paired as default, you do not need to pair the 
camera and the monitor unless you reset your camera. For pairing each 
other please take a reference from  UI definition, Camera              page

BABY CARE

Get Frequency Option, press           to setup target frequency.
Press          with saving, press           without saving and return to Setting page.

Get Background Color option, press           to setup target background color, 
Press          with saving, press           without saving and return to Setting page.

Get Lullaby, press           to setup Lullaby on/off.
Press          with saving, press           without saving and return to Setting page.
Get Night Light, press           to setup Night Light on/off.
Press          with saving, press           without saving and return to Setting page.

TEMPERATURE ALERT
Setup High/Low Temperature Alert, 
Press            to setup High/Low temperature target degree, 
Press            to choose,
Press   ‘ OK ’   to confirm, press   ‘ Cancel ’ to cancel.

• Are the Monitor and Camera plugged in to a working electrical outlet?
    – Make certain any light switches that control power to the wall outlet 
   are ON.
    – Check for pinched power cords.
• Are the Monitor and Camera turned ON?
    – To turn Monitor ON.
    – To connect the camera into the wall plug
• Is the Monitor in sleep mode?
    – Press the Video ON/OFF key to turn the display ON.

• If there is no connection, the words “Out of Range” will be shown on the 
   video display.
• Make certain that the Camera is turned ON, the green LED Power On 
   indicator should be lit.
• The Monitor may be too far away from the Camera, bring the Monitor 
   closer to the Camera.
• The Camera could have lost its connection to the Monitor. Pair the units 
   by following the “Pair”  a Camera instructions.

Ensure that the Monitor and Camera are away from obstacles that may 
interfere with the signal such as; walls, floors, ceilings, Wi-Fi routers, 
microwave ovens, cordless phones, Bluetooth devices, home computers, 
among other electronic devices. It is recommended to keep your Video 
Monitor away from these types of devices at least 5 feet. If the signal is 
weak, try moving the Monitor and/or Camera to different positions in the 
rooms.

•The Camera is in a dark environment and Night Vision Mode has been 
  activated. Ensure that the Camera is in a well-lit environment to de-activate 
  Night Vision Mode.

• The units may be too close, move the Monitor further away from the 
   Camera.
• Look for any noise source in baby’s room. Remove noise source or move 
   Camera away from the source.
   Monitor not responding (frozen or unresponsive)
• Switch off and on the monitor.

     

          Camera paired (Default)

     

          UI definition

          VOX

          CAMERA

          ALARM

          ZOOM IN/OUT

          SETTINGS

          TEMPERATURE ALERT

.............................6

..........................................7

..............................................7

..........................................................8

...........................8

..........................................................9

.............................................10

.............................................10

..........................................................10

..................................................10

.....................................................10

..........................................10

.................................................11

.............................11

..........................................12

...............................14

........................................16

To clean your Video Monitor, disconnect all cables and turn OFF. Use a soft, 
lint-free cloth. Avoid getting moisture in openings.
Maintain your Video Monitor away from direct sunlight,  hot or humid  
areas. Do not let product get wet.

FCC Part 15: This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that

may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved 

by the party responsible for compliance could void the user’s authority 

to operate the equipment.

NOTE: This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or 

more of thefollowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that 

   to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

To ensure safety of users, the FCC has established criteria for the 

amount of radio frequency energy that can be safely absorbed by a 

user or bystander according to the intended usage of the product.

SETTINGS 
Getting Settings, time and date, language, temperature mode, 
frequency option, color, lullaby, night light

Get Time and date, press         to setup date and time, 
Press          to get the target time and date, 
Press  ‘ OK ’ to confirm, press  ‘ Cancel ’ to leave as it is.

Get Language, press           to setup target language, 
Press           with saving, press          without saving and return to Setting page.

Get Temperature Mode, press            to setup target Temperature mode.
Press          with saving, press           without saving and return to Setting page.

Press             to setup Sensitivity/sleep, get Sensitivity/sleep bar, 
Press             to  get the target setting.
Press             to exit, press            to save the setting and exit. 

CAMERA 
Press             to setup Camera 1, 2, 3, 4, manual, auto
Choose camera 1, 2, 3, 4 , press           to choose pair/un-pair,  
Press             to choose OK/cancel，Press  OK  to save and back to Live Video 
Press             to choose manual, auto. 

UI definition 
Press LCD on/off button 3s to get into User Interface.

This product has been tested and found to comply with the FCC criteria. 

The baby unit shall be installed and used such that parts of the user’s 

body other than the hands are maintained at a distance of approximately 

20 cm (8 inches) or more.

This equipment complies with FCC radiation exposure limits set forth for 

an uncontrolled environment. This equipment should be installed and 

operated with minimum distance 20 cm (8 in.) between the radiator & 

your body.

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with Industry Canada license-exempt RSS s

tandard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must 

accept any interference, including interference that may cause 

undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only 

operate using an antenna of a type and maximum (or lesser) gain 

approved for the transmitter by Industry Canada. To reduce potential 

radio interference to other users, the antenna type and its gain should 

be so chosen that , the equivalent isotropically radiated power (e.i.r.p.) 

is not more than that necessary for successful communication.

To ensure compliance with RSS-102 RF exposure requirements, this 

device must be installed in a location such that the antenna of the 

device will be greater than 20 cm (8 in.) away from all persons.

1. Connect Monitor to AC outlet.
2. Switch the  ON/OFF  button in ON position, the monitor turns to start 
    to work.
3. The Monitor and Camera are turned on,  video captured by the Baby 
    unit will appear  on the video screen.
4. Switch ON/OFF button in OFF position the  monitor will shut 
    immediately.
5.While Pressing            to have talk back to the camera, 
    release             button to hear the baby voice.    

BABY CARE

ALARM
Press          to setup Alarm Volume/Alarm Clocks,
Get Alarm Volume, press         to setup Volume,
press            to choose right volume,
Press         or         to save and exit to UI icon,
Get Alarm Clock, press             to setup Morning call, 
Feeding alarm 1, 2, 3, 4 press             to setup alarm status,
Press           to setup on/off, press            to save and return to Alarms clock.
Get Alarm time to press               to be able to setup timer, 
Press               and                 to get right time.
Press               to get Alarm time without saving, press             to save the time.

ZOOM IN/OUT
Get Zoom, press            to setup Zoom in/out to press            to choose the right 
zoom time.
Press              or             to save and exit.