IceRobotics Limited ICE3DST3 사용자 설명서
symbol. Click on the header data to bring up a dialogue box, as illustrated in figure10 that
enables you to enter new header information.
enables you to enter new header information.
Figure 10. Changing session header information
4.5.2 Changing Session Start Time/Date
In some experiments, it may be helpful to change the session times from different IceTag3Ds
to start at the same point. Files must be changed from ‘read only’ to read/write format. Section
4.5.1 explains how to change the file from ‘read only’ to ‘read/write’. Changing session start
time/date can also be helpful if an IceTag3D is activated using a PC that has incorrect time
and date settings. It is important to note that care is required when dealing with several
sessions. Data time co-ordination is dependant on PC time and must be carefully co-
ordinated to match different session times appropriately.
In some experiments, it may be helpful to change the session times from different IceTag3Ds
to start at the same point. Files must be changed from ‘read only’ to read/write format. Section
4.5.1 explains how to change the file from ‘read only’ to ‘read/write’. Changing session start
time/date can also be helpful if an IceTag3D is activated using a PC that has incorrect time
and date settings. It is important to note that care is required when dealing with several
sessions. Data time co-ordination is dependant on PC time and must be carefully co-
ordinated to match different session times appropriately.
To change the start time and date of a session file, move the mouse over the column that
displays the acquisition times of the recorded data. When the mouse pointer changes to a
hand symbol, click to display the dialogue box in figure 11.
displays the acquisition times of the recorded data. When the mouse pointer changes to a
hand symbol, click to display the dialogue box in figure 11.
Figure 11. Changing the session start time and date.