AMEDTEC Medizintechnik Aue GmbH CCMD-BT 사용자 설명서
Draft
CareCenter MD 1.0
70-00663-01 D
Product Information and Safety
20
Cleaning and care
Patient cable
Connect the patient cable to the acquisition device according to
the instructions for the device in the Connecting the Acquisition
Devices quick steps. During the preparation for an acquisition,
the system will prompt you to attach the leads to a patient.
the instructions for the device in the Connecting the Acquisition
Devices quick steps. During the preparation for an acquisition,
the system will prompt you to attach the leads to a patient.
Patient cable use
This cable is intended to be used for the hook-up of a patient to
an electromedical device with the purpose of sensing
electrocardiography signals from the human skin using
appropriate disposable or reusable ECG electrodes. The
application must be performed by a skilled medical professional.
Use the patient cable only as it is intended.
an electromedical device with the purpose of sensing
electrocardiography signals from the human skin using
appropriate disposable or reusable ECG electrodes. The
application must be performed by a skilled medical professional.
Use the patient cable only as it is intended.
!
WARNING! Electrical safety.
Mis-using the patient cable can cause shock. Never attempt to
connect the patient cable directly to power. Connect the patient
cable directly to the acquisition device and use the patient cable
only as directed.
connect the patient cable directly to power. Connect the patient
cable directly to the acquisition device and use the patient cable
only as directed.
!
WARNING! Patient safety.
To prevent tripping, always ensure the patient belt allows freedom
of movement. Use the belt loops to manage excess cable length.
Before beginning the test, ensure there are no obstructions.
of movement. Use the belt loops to manage excess cable length.
Before beginning the test, ensure there are no obstructions.
◆
Check the cable integrity before each use.
In case of damage of any kind, do not use and do not
attempt to repair cable. Consult your biomedical technician.
If cable is found to be contaminated, clean it and disinfect it
(see
attempt to repair cable. Consult your biomedical technician.
If cable is found to be contaminated, clean it and disinfect it
(see
), before
reusing the cable.