ICP ICP9014RO 2181700-R 전단
제품 코드
2181700-R
64-bit/133MHz PCI-X – Ultra320 SCSI
Hardware RAID Controller
●
RAID 0, 1, 5, 10, 50 and JBOD (single disks)
●
Hot Plug, Auto Hot Plug with SAF-TE support
●
Global or Dedicated Hot Spare (Hot Fix) drives
●
Hardware RAID is totally independent from the host
and operating system
and operating system
●
Integrated acoustic alarm
Versatile Connectivity Capabilities
●
Always one internal and one external SCSI connector
per Ultra320 SCSI channel
per Ultra320 SCSI channel
●
Connection of up to 15 SCSI devices per channel,
with software-switchable termination, supports LVD
and SE operation
with software-switchable termination, supports LVD
and SE operation
●
Maximum synchronous data transfer rate up to
320MB/sec. per channel (Ultra 320 LVDS) depending
on the attached drives
320MB/sec. per channel (Ultra 320 LVDS) depending
on the attached drives
●
Backwards compatible to former SCSI devices
●
Cable length up to 12 meters (LVDS) per channel
PCI-X Bus Specification
●
64-bit/133MHz PCI-X bus interface with up to
1056MB/sec. bandwidth
1056MB/sec. bandwidth
●
Backwards compatible with PCI-X/100MHz,
PCI-X/66MHz and PCI 64-bit/66MHz interfaces
PCI-X/66MHz and PCI 64-bit/66MHz interfaces
●
Needs one 3.3 Volt PCI/PCI-X slot
New RAID Controller Architecture, Processor
and Memory Technology
and Memory Technology
●
Integrated high-performance ROC (RAID-on-Chip)
ASIC including “Hardware XOR Engine” offloading
the controller CPU
ASIC including “Hardware XOR Engine” offloading
the controller CPU
●
Supported DDF (Disk Drive Format) is the Adaptec*
Metadata Format (AMF) that allows the interchange of
RAID arrays between the new ICP Controllers (not com-
patible with former GDT Controllers)
Metadata Format (AMF) that allows the interchange of
RAID arrays between the new ICP Controllers (not com-
patible with former GDT Controllers)
●
Supports 64-bit systems for AMD* 64 and Intel* EM64T
●
Onboard 256MB/64-bit ECC DDR memory, intelligent
multi-level cache algorithm
multi-level cache algorithm
Intelligent Battery Backup Unit (optional)
●
RAID cache holds all data and stores it even in the
case of power failure, at system/controller restart all
data in cache will be written to the hard drives
case of power failure, at system/controller restart all
data in cache will be written to the hard drives
●
Lithium ion battery with typ./min. 72-hour cache
memory protection
memory protection
●
One-year warranty on the battery at appropriate
handling (see manual)
handling (see manual)
●
ABM-400 (order number 2122700)
Operating System Support
●
Windows* XP; Windows* 2000 Server, Advanced Server
and Professional; Windows* Server 2003, Standard and
Enterprise; Windows* XP Professional x64 Edition;
Windows* 2003 x64 Edition
and Professional; Windows* Server 2003, Standard and
Enterprise; Windows* XP Professional x64 Edition;
Windows* 2003 x64 Edition
●
Linux: Red Hat* Advanced Server 3.0, SuSE* 9.1,
SuSE* Linux Enterprise Server 9
SuSE* Linux Enterprise Server 9
●
Novell* NetWare* 6.x
●
SCO* OpenServer* 5.06a and 5.07, UnixWare* 7.1.3
High Configuration Flexibility
●
ROM-resident setup for configuration and
maintenance (CTRL+<A>)
maintenance (CTRL+<A>)
●
Simultaneous operation of several disk arrays,
multiple arrays even on the same disk
multiple arrays even on the same disk
●
Flexible capacity setting
●
Full capacity utilization of mixed size drives
●
Online capacity expansion
●
New enhanced, online RAID level migration
●
Complete disk array migration
●
The RAID arrays from other ICP RAID controllers can
easily be migrated without reconfiguration (Array
Roaming), this is not posssible with ICP RAID
Controllers of the GDT series
easily be migrated without reconfiguration (Array
Roaming), this is not posssible with ICP RAID
Controllers of the GDT series
●
Automatic adaptation to changes in SCSI configuration
(ID/SCSI channels)
(ID/SCSI channels)
Integrated RAID Software
now including ICP Storage Manager (ISM)
now including ICP Storage Manager (ISM)
●
ICP RAID Configuration Utility – installation and
monitoring software, for all supported operating
systems, remote access, connection to the common
management of the Adaptec* products
monitoring software, for all supported operating
systems, remote access, connection to the common
management of the Adaptec* products
●
Support for S.M.A.R.T exceptions
●
Software updates based on Flash-RAM technology
including recovery function, actual firmware, drivers
and tools available at www.icp-vortex.com
including recovery function, actual firmware, drivers
and tools available at www.icp-vortex.com
Delivery Contents
●
Either single-channel (order number 2181700) or
dual-channel (order number 2181900) ICP disk array
controller with onboard 256MB ECC DDR memory
dual-channel (order number 2181900) ICP disk array
controller with onboard 256MB ECC DDR memory
●
Always standard full height PCI bracket mounted, an
additional bracket for low profile PCI slot is included
additional bracket for low profile PCI slot is included
●
Quick Installation Guide
●
CD-ROM with tools, drivers and comprehensive
manual
manual
●
Three-year warranty for controllers
●
Lifelong ICP hotline support
Copyright 2005 ICP vortex Computersysteme GmbH. ICP “Intelligent Computer Peripherals” is a registered trademark.
*Other names and brands may be claimend as the property of others. T
echnical changes reserved.
Product pictures may differ from actual products. Printed in Germany
E
x
c
e
l
l
e
n
c
e
i
n
C
o
n
t
r
o
l
l
e
r
s
ICP vortex Computersysteme GmbH · Konrad-Zuse-Str. 9 · D-74172 Neckarsulm · Germany
ICP Support Hotline · Phone: +49-7132-9620-900 · E-Mail: icp_support@adaptec.com · http://www.icp-vortex.com