Industrial Technology Research Institute 00000UHFISTC01 사용자 설명서
User Manual Document
Document Title
Doc. No.
Model Ver. Doc. Ver. Issue Date
Page
Handfree Mini Reader
Module
1.0
ISTC01
1.0
09/14/2009
10 of 10
4.1.6 Starting Windows Demo Program
After installing the demo program, you can connect the reader to the computer
using a serial cable (standard DB9 connectors). Please make sure that you have an
antenna connected to the reader.
The program supplied with the kit is able to interface to all the RFID readers made
by Proview. You should open the program (Proview reader control panel), then go
to the Reader menu and selected . Then go to the ComPort menu and select the
proper COM port where you connected the reader. You should then verify that the
BaudRate setting is correct (9600), then you can click the CONNECT button.
After you run the program for the first time, the software settings will be saved
automatically so you should not need to reconfigure the control program unless
you switch to another reader product.
using a serial cable (standard DB9 connectors). Please make sure that you have an
antenna connected to the reader.
The program supplied with the kit is able to interface to all the RFID readers made
by Proview. You should open the program (Proview reader control panel), then go
to the Reader menu and selected . Then go to the ComPort menu and select the
proper COM port where you connected the reader. You should then verify that the
BaudRate setting is correct (9600), then you can click the CONNECT button.
After you run the program for the first time, the software settings will be saved
automatically so you should not need to reconfigure the control program unless
you switch to another reader product.
Reader menu
ComPort menu