Lebro Industrial Co. Ltd. S210I 사용자 설명서

15 

 

 

S200i version 2.0 

miniNOTE user’s manual 

 

 
 

Battery Pack 

This miniNOTE is equipped with a high-capacity rechargeable Li-ion battery pack. The 
battery pack is used as an internal power source to the miniNOTE. 

 

WARNING: 

Carefully note that any try to disassemble the battery pack by an unauthorized mechanician 

will be dangerous to the person. 

 

NOTE: 

Also, be aware of that the battery pack may be damaged and lose its efficiency if you try to 

disassemble the battery pack by yourself. 

Please follow your local laws and regulations to recycle the unused battery pack. 

You are kindly recommended to have another battery in reserve for enough power supply. 

Please contact your local dealer to buy an extra battery pack. 

 

 
Inserting the Battery Pack 

To insert the battery pack, following the steps below: 

1. Carefully align the battery pack into the compartment 

with correct orientation. 

2. Use both hands slightly slide and press the battery 

pack into the right position. 

3.  Make  sure  that  the  battery back is fastened in the 

compartment. 

 

 
 

Releasing the Battery Pack 

To remove the battery pack, following the steps below: 
1. Make  sure  the  miniNOTE  is  turned  off,  and  the  AC 

power is disconnected. 

2. Use both hands to push the battery release buttons in 

the unlock position to release the battery pack. 

3. Carefully slide the battery pack out of the compartment 

and then pull the battery pack out. 

 
 

Using the Battery Pack 
 

Battery Safety Tips 

Replacing or handling the battery pack improperly may present a risk of fire or explosion, 
which could cause serious injury. 

Only replace the battery pack with the same or equivalent type of battery pack. 
Do not disassemble, short-circuit or incinerate the battery pack or store it to temperatures 

above +60°C (+140°F).