Lebro Industrial Co. Ltd. S210I 사용자 설명서

18 

 

 

S200i version 2.0 

miniNOTE user’s manual 

 

 

Your miniNOTE is equipped with a 2.5-inch hard disk drive. The hard disk drive is a storage 
device with much higher speed and larger capacity than other storage devices, such as the 

floppy disk drive and optical storage device. Therefore, it is usually used to install the 

operating system and software applications. 
 

NOTE: 

To avoid unexpected data loss in your miniNOTE, please backup your critical files 

regularly. 

Do not turn off the miniNOTE when the HDD LED is on. 

Do not remove or install the hard disk drive when the miniNOTE is turned on. The 

replacement of hard disk drive should be done by an authorized retailer or service 

representative. 

 

 

 
Please follow the instructions below to install the Windows XP operating system and 

Device Drivers into the miniNOTE. 
 

Attach the power cord to the AC adapter and the miniNOTE. 

Connect the external USB CD-ROM or DVD-ROM to the miniNOTE. 
Place the Windows XP installation disk into the external USB CD-ROM or DVD-ROM 

connected. 
Start the miniNOTE and press [F11] while the miniNOTE is booting up to choose a 

booting device. 

Select the boot device "USB: xxxxxxx (maybe labeled with different name)" to boot from 
the optical device drive. 

Delete any existing partition while the Windows XP installation screen appears. Note that 
it is strongly recommended to back up the data that stored in the attached external hard 

disk drive or the USB flash drive. 

Press [Enter] and select "Format the partition using the NTFS file system" to start the 
Installation of Windows XP operating system. Follow the on-screen instructions to 

continue and complete the installation process. 
Restart the miniNOTE and enter the Windows XP operating system. Place the drivers disk 

of this miniNOTE into the external USB CD-ROM or DVD-ROM and follow the Driver 

Installation Wizard to install all drivers.