Zebra P1031365-027 사용자 설명서
56
QLn Series User Guide
Label Specifications
Parameter
QLn320
QLn220
Media Width
1.0 in. to 3.125 in. (38,1 to
78,4 mm)
.63 in to 2.18 in. (16 mm to
55,37 mm)
Max/Min Label
Length
Length
0.5 in. minimum to 32 in.
maximum
Same
Black Bar
Sensor to
Printhead Burn
Line Distance.
Sensor to
Printhead Burn
Line Distance.
0.56 in. (14,22 mm)
0.53 in. (13,46 mm)
Label Thickness
0.0023 in to 0.0065 in
(0.058 mm to 0.165 mm)
0.0023 in. to 0.0055 in.
(0.058mm to 0.140 mm)
Tag Thickness
0.0055 in. (0.152 mm)
maximum
Same
Max. Label Roll
dia.
dia.
2.6 in. (66,8 mm) O.D.
2.2 in. max (55,8 nn) O.D.
Label Inner
Core**
Core**
0.75 in. (19 mm) or 1.38 in
(35,05 mm) minimum dia. for
linered
Same
1.38 in. (35,05 mm) minimum
dia. for linerless media
dia. for linerless media
Same
Black Mark
Location
Location
The reflective media black
marks should be centered on
the media roll.
marks should be centered on
the media roll.
Same
Black Mark
Dimensions
Dimensions
Minimum mark width: 0.5
in. (12,7 mm) perpendicular
to inside edge of media,
centered within the width of
the roll.
Mark length: 0.12 in. to 0.43
in. (3-11 mm) parallel to
inside edge of media
in. (12,7 mm) perpendicular
to inside edge of media,
centered within the width of
the roll.
Mark length: 0.12 in. to 0.43
in. (3-11 mm) parallel to
inside edge of media
Same
Use Zebra brand direct thermal media that is outside wound. Media
may be reflective (black mark) sensing, or transmissive (gap) sensing,
die-cut, continuous, or linerless.
For die-cut labels, use only full auto dies.
**
QLn Series printers support coreless media which is 0.75 in. (19 mm) in
inner diameter.