Funkwerk Bintec W1002n 5510000165 사용자 설명서

WLAN disabled

In this operation mode the device is a powerful 2-port VPN router

WLAN access point

WLAN access point with VPN router functionalities

WLAN bridge

Point-to-point and point-to-multipoint mode (up to 8 links)

WLAN client

Transparent client for direct connection of Ethernet devices

Encryption WEP/WPA

WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal,
WPA2 enterprise

IEEE802.11i authentication and
encryption

802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management,
PSK/TKIP encryption, AES encryption, 802.1x/EAP

Access control list (ACL)

MAC address filter for WLAN clients

VLAN

Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN
configuration according IEEE 802.1q; up to 32 VLANs supported.

Inter cell repeating

Inter traffic blocking for public hot spot (PHS) applications for preventing of communication
radio client to radio client in a single radio cell.

NAT/PAT

Network & Port Address Translation / Stateful Packet Inspection: Isolation of complete network
from public access

VPN - IPSec

10 tunnels inclusive, 100 more via separate license

VPN - IPSec

Powerful encryption up to 256 bits (AES, 3DES, DES, CAST, Blowfish, Twofish)

VPN - IPSec DPD

Dead Peer Detection for IPSec tunnels

VPN - PPTP

Integrated

VPN - PPTP

Strong encryption up to 128 bits (MPPE), up to 168 bits (DES/3DES, Blowfish)

DynDNS / DynVPN

Router can still be reached over the Internet in spite of dyn. IP address

IKE for IPSec

Pre-Shared Keys and X.509 certificate support

X.509

X.509 v1/v3 certificates (PKCS#7/8/10, 12, CLRs, SCEP)

QoS for IPSec

Available

PKI Support for IPSec

Available

NAT Traversal for IPSec

Available

IPCOMP

IP compression

IPSec / RADIUS

Available

IPSec redesign

Policy manager and interface concept

L2TP

Layer 2 tunnelling protocol for ATM, Ethernet, PPP; user authentication

GRE

V.0 according RFC 2784 for common encapsulation

Hardware encryption

3DES, AES and RC4

Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com 

bintec W1002n
07.09.2010
Subject to technical
alterations