Hanson Technology Limited M100 사용자 설명서
6
Getting Started | Hanson Technology Limited
In the case of successful keyboard input or touch gesture, LED Green will flash one
time shortly.
If system detects a battery low status, it will flash LED Blue quickly.
When external power source is connected, LED will show red color, until battery is
fully charged.
Side [Connect] and [Mode] buttons
[C] Bluetooth Connect button While Bluetooth is not connected, press this button will
activate Bluetooth connect request, to broadcast itself for other devices to find and pairing.
In power-saving mode, this key is to wake up key.
In power-saving mode, this key is to wake up key.
[M]
Mode button Press this button and mode switch keys at the same time to change
the operation modes. The operation modes can be divided into 1) the supported operating
systems, 2) function modes. To adjust to right operating system in connection, this product
is able to optimize touch gestures applying to specific OS functions. Function modes include
keyboard, mouse, multimedia, backlit switch, g-sensor switch, sound echo and vibration
switches.
systems, 2) function modes. To adjust to right operating system in connection, this product
is able to optimize touch gestures applying to specific OS functions. Function modes include
keyboard, mouse, multimedia, backlit switch, g-sensor switch, sound echo and vibration
switches.
Pairing a Bluetooth connection
While Bluetooth is not connected to a host device, press the Connect [C] button,
Bluetooth will start to make it discoverable to other devices. LED indicator will flash blue
slowly, and other devices will be able to find it as a keyboard with the name of ‘FelTouch
Magic’.
Through pairing process, host device will require a pairing PIN code in display for the
keyboard to enter. After entering this correct PIN code, and press [Enter], this completes the
pairing process, and will see ‘Connected’ status change from host device.
slowly, and other devices will be able to find it as a keyboard with the name of ‘FelTouch
Magic’.
Through pairing process, host device will require a pairing PIN code in display for the
keyboard to enter. After entering this correct PIN code, and press [Enter], this completes the
pairing process, and will see ‘Connected’ status change from host device.
Power switch and power standby mode.
Power switch is on left side, labeled as ON and OFF. Move it up and down to turn off or
on the power.
If the power is turned on, and does not use more than 10 minutes, it will automatically
enter power-saving mode to save power. In the power-saving mode, [C] button can be used
to wake up this device, and enter into normal operation mode.
to wake up this device, and enter into normal operation mode.