Phonetone Technology Co. Ltd. PTEC70 사용자 설명서
3 / 6
INSTALLATION PROCEDURES
NOTE:
This wireless amplifier can be used for home, office, apartment and all other
applicable area. Do not place the equipment in direct sunlight or in an area that
has abrupt temperature and humidity changes.
The whole Kit includes everything you need to enhance coverage within your area.
Installation of the Repeater is very easy and takes minutes. Just mount the outdoor
antenna and connect to the booster input connector. At the output of the Repeater
connect the indoor coverage antenna then plug-in the power supply, you'll enjoy
enhanced coverage service in your home or office. For best performance the external
aerial should be mounted in the location with the strongest signal strength. The effective
coverage area of the unit depends on the input signal provided from this antenna.
1.
Prepare a location. Place or Fix the equipment on a sturdy, and the surface in a
well-ventilated area, makes sure that the air vents are not blocked.
2.
Connect the Inside Antenna: The indoor antenna is intended for indoors use
only. Remove the cap from the Amplifier connector marked with CELLULAR
PHONE. Screw the indoor antenna in to the CELLULAR PHONE connector and
make sure to tighten it.
3.
Connect the Outside Antenna: The outdoor antenna is for outdoor use only.
Select an outside mounting location. For best performance, try to keep the antenna
on top of the location. The outside antenna should be located in an area with at least
a 30” radius clear of obstructions, and other radiating elements. Remove the cap
from the Amplifier connector marked with OUTSIDE ANTENNA. Screw the outside
antenna in to the OUTSIDE ANTENNA connector and make sure to tighten it.
NOTE:
Keep the separation distance between the inside and outside antennas at
least 20 feet apart.
The outside antenna must be mounted with a separation distance of at
least 3 feet from any of the other occupants or nearby persons and must not
be co-located or operating in conjunction with any other antenna or amplifier.
Antenna gain is 3dBi(Max.).