LG Innotek Co. Ltd. RNCDSW01A 사용자 설명서
Product Description
The video doorbell(VDB) is an all-new addition to the AT&T digital
life portfolio. When the someone presses on the bell button on the
VDB, you and your family get an instant notification on your
smartphones.
Enabling AT&T digital life mobile app, you to see and speak with
your visitors no matter where you are in the house or in the world at
any time. You can also proactively wake up the VDB on your demand
and see what is happening on your porch or driveway as you wish.
The VBD is compatible with existing mechanical chime and traditional
door transformer (12~24Vac) without any problem.
The video from the VDB is 720p and covers a vertical field of view as
wide as over 160°, even though mounted 1 meter height, you can
see the visitors face without cut off. In the day time, you can see
visitors face as clear as with HDR(High Dynamic Range) function of
image processing. And in the night time, you can visible with white
illumination LED if you needs.
Tampering alter and video motion detection function will gives you
event notification from your porch or driveway when someone steal
your important deliveries. Also the approaching sensor recognize
someone is approaches or departs to VDB, it gives you new user
experience.
life portfolio. When the someone presses on the bell button on the
VDB, you and your family get an instant notification on your
smartphones.
Enabling AT&T digital life mobile app, you to see and speak with
your visitors no matter where you are in the house or in the world at
any time. You can also proactively wake up the VDB on your demand
and see what is happening on your porch or driveway as you wish.
The VBD is compatible with existing mechanical chime and traditional
door transformer (12~24Vac) without any problem.
The video from the VDB is 720p and covers a vertical field of view as
wide as over 160°, even though mounted 1 meter height, you can
see the visitors face without cut off. In the day time, you can see
visitors face as clear as with HDR(High Dynamic Range) function of
image processing. And in the night time, you can visible with white
illumination LED if you needs.
Tampering alter and video motion detection function will gives you
event notification from your porch or driveway when someone steal
your important deliveries. Also the approaching sensor recognize
someone is approaches or departs to VDB, it gives you new user
experience.
Installation
The VDB supports easy installation to you with following steps.
If you need extra help, please contact online support team available 7
days a week, and accessible 24/7.
Online help center :
Contact support team :
If you need extra help, please contact online support team available 7
days a week, and accessible 24/7.
Online help center :
Contact support team :
Step 1.
Check out all the cool stuff in the box.
2 Anchors – Use to drill holes if using the anchors.
2 Screws – For attaching VDB wall bracket to your wall.
1 Wall bracket – For mounting VDB to your wall.
1 10degee angle wall bracket – Use these if you need to
change angle of the mounting.
1 Battery(370mAh) – Need to battery for operation.
1 Wire stripper and separator – For stripper and disconnect
wire from wall bracket connector.
2 Anchors – Use to drill holes if using the anchors.
2 Screws – For attaching VDB wall bracket to your wall.
1 Wall bracket – For mounting VDB to your wall.
1 10degee angle wall bracket – Use these if you need to
change angle of the mounting.
1 Battery(370mAh) – Need to battery for operation.
1 Wire stripper and separator – For stripper and disconnect
wire from wall bracket connector.
Step 2.
Check out the function block of the VDB.
Step 3.
Remove your existing doorbell. To get started, shut off power and
the breaker, Then remove your existing doorbell from the wall and
the disconnect the wires.
the breaker, Then remove your existing doorbell from the wall and
the disconnect the wires.
Step 4.
Connect wires to wall bracket and makes drill to wall for anchors and
screws. And then screw the wall bracket to wall.
✓
screws. And then screw the wall bracket to wall.
✓
NOTE: Make sure the drill hole position to fit to wall bracket
holes.
✓
NOTE : If you need angle wall bracket, please assemble it to
wall bracket before mounting wall bracket to wall.
Step 5.
Connect the battery to VDB for starts up. Then the VDB will inform
to you “Connect me AC power” with tone.
✓
to you “Connect me AC power” with tone.
✓
NOTE: The VDB need certain battery level for starts up. If the
battery level is low, it will not inform the tone. In this case, you
must connect to AC power without any information.
✓
NOTE: When the battery is low, the VDB will inform “Ready in
XX
minutes.” when you press door button on VDB.
Step 6.
After connect AC power, the VDB will inform to you “Press the bell
button for WPS process” tone. Press doorbell button and press
WPS button of DLC or other access point. Then the VDB will trying
to connect through the Wi-Fi. It takes Max. 2 minutes and there’s
possibilities of failure. Try it again if it fails.
✓
WPS button of DLC or other access point. Then the VDB will trying
to connect through the Wi-Fi. It takes Max. 2 minutes and there’s
possibilities of failure. Try it again if it fails.
✓
NOTE: The VDB need at least -60dBm of RSSI. Please check the
AP’s Wi-Fi signal strength on VDB position before installation. If
the RSSI is lower than -60dBm, the installer should use Wi-Fi
extender or alternative solution.
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,ATT-DOORBELL; LG-INNOTEK P/N: RNCD-SW01A/B/C; INK: BLACK; MATERIAL: 20# MEAD BOND; SIZE: 8.500” x 11.000”; SCALE: 1-1; SIDE 1 OF 2
Video Doorbell(VDB)
Installation Instructions