Jiangmen Dascom Computer Peripherals Co. Ltd. DP530L 사용자 설명서
23
Problem
Possible Cause
Solution
Battery not installed properly
Remove and reinstall battery
making sure the battery is
seated with door closed.
making sure the battery is
seated with door closed.
Battery not charging.
Faulty power adapter or
battery
battery
Try new power adapter, or
replace battery.
replace battery.
Poor print quality.
Low battery
Check and recharge battery.
Print head dirty
Clean print head. Refer to
“
“
” section of this
document.
Poor quality or “old” paper
Verify paper from approved
source. Try new roll of
paper.
source. Try new roll of
paper.
Paper not feeding.
Obstruction in paper path, or
paper improperly installed
paper improperly installed
Check paper path and
reinstall paper (see “
reinstall paper (see “
”).
Poor quality paper
Verify paper from approved
source.
source.
Paper Door not fully closed
Verify door is closed.
Paper does not advance to
black mark reliably.
black mark reliably.
Dirty Black Mark/Paper
Sensor
Sensor
Clean Sensor as described
in “
in “
” section of
this document.
Black Mark density/contrast
Adjust Mark Sensitivity as
described in Device Settings
Menu .
described in Device Settings
Menu .
Paper not feeding reliably or
print is compressed vertically
print is compressed vertically
Poor quality paper
Verify paper from approved
source.
source.
Heavy or thick forms;
specialty paper with slick
finish
specialty paper with slick
finish
Lower the Max Paper Speed
as described in Device
Settings Menu .
as described in Device
Settings Menu .
Paper Door not fully closed
Verify door is closed.
Print Garbled.
Low Battery
Check and recharge battery.
Improper Serial Interface
configuration
configuration
Verify printer and host
settings match.
settings match.
Paper Door not fully closed
Verify door is closed.
Printer will not print.
Low Battery
Check and recharge battery.
Paper not loaded correctly
Check paper path and
reinstall paper
reinstall paper
(see “
”).
Improper Serial Interface
configuration
configuration
Verify printer and host
settings match. Print a self-
test to verify printer settings
and to verify printer is
functioning properly.
settings match. Print a self-
test to verify printer settings
and to verify printer is
functioning properly.
Cannot print via optional
interface.
interface.
Interface not configured
correctly
correctly
Print a self-test to verify
printer settings. Make sure
printer and host set ups
match.
printer settings. Make sure
printer and host set ups
match.