YANTAI HAOLIBEST LIGHTING CO LTD R100G9519W 사용자 설명서
ENERGY-SAVING LAMP INSTRUCTIONS
The specification of energy-saving lamp
No Type Rated
Voltage
Rated
Frequency
Rated
Wattage
Current Lampholder
1
A70 19W E26
AC 110-120V
50/60Hz
19W
350mA
E26
2
G95 19W E26
AC 110-130V
50/60Hz
19W
350mA
E26
3
R40 23W E26
AC 110-130V
50/60Hz
23W
420mA
E26
4
T2 23W E26
AC 220-240V
50/60Hz
23W
420mA
E26
Treatment of the lamp
- Please don't drop the lamp or push against it.
- Please don't disassemble the lamp, don't make alterations.
Installation
- While installing and changing the bulb, please cut off the power in order to guarantee the security.
- Don't connect the lamp to a dimmer circuit.
- Don't install inside a recessed area in the wall.
- Don't use lids without ventilation openings.
- Don't cover with a glass bowl.
FCC Information
1. This device complies with Part 18 of the FCC Rules.
2. Information on the following matters shall be provided to the user in the
Instruction manual:
(a) The interference potential of the device or system;
(b) Maintenance of the system;
(c) Simple measures that can be taken by the user to correct interference;
(d) Manufacturers of RF lighting devices must provide an advisory statement,
either on the product packaging or with other user documentation, similar to
the following: This product may cause interference to radio equipment and
should not be installed near maritime safety communications equipment or
other critical navigation or communication equipment operating is between 0.
43 kHz and 30 kHz. Variations of this language are permitted provided all
the points of the statement are addressed.
2. Information on the following matters shall be provided to the user in the
Instruction manual:
(a) The interference potential of the device or system;
(b) Maintenance of the system;
(c) Simple measures that can be taken by the user to correct interference;
(d) Manufacturers of RF lighting devices must provide an advisory statement,
either on the product packaging or with other user documentation, similar to
the following: This product may cause interference to radio equipment and
should not be installed near maritime safety communications equipment or
other critical navigation or communication equipment operating is between 0.
43 kHz and 30 kHz. Variations of this language are permitted provided all
the points of the statement are addressed.
Safety cautions:
- Use only in indoor areas.
- Don't use as emergency lighting.
- To avoid electrical shock, don't install in damp or wet locations.
- Don't touch the lamp directly with your hand or face when it is in use to avoid burns.
- If the lamp is damaged, replace it by a new one and don't try to repair it in order to avoid hazards.