MitraStar Technology Corporation DSL2401HNAT1CC 사용자 설명서

Chapter 6    LAN

58

Network Connections: My Network Places: Properties: Example

Send RA on

Select this to have the Router send RA (Router Advertisement) messages to the LAN 

hosts.

Note: The LAN hosts neither generate global IPv6 addresses nor communicate with 

other networks if you disable this feature.

Advertisement 

interval option on

Select this to have the RA messages the Router sends specify the allowed interval 

between RA messages.

Hop Limit

Enter the maximum number of network segments that a packet can cross before 

reaching the destination. When forwarding an IPv6 packet, IPv6 routers are required to 

decrease the Hop Limit by 1 and to discard the IPv6 packet when the Hop Limit is 0.

Router Lifetime

Enter the time in seconds that hosts should consider the Router to be the default 

router. 

Router Preference

Select the router preference for the Router. The Router sends this preference in the 

router advertisements to tell hosts what preference they should use for the Router. 

This helps hosts to choose their default router especially when there are multiple IPv6 

routers in the network.

Note: Make sure the hosts also support router preference to make this function work.

Reachable Time 

(ms)

Enter the time in milliseconds that can elapse before a neighbor is detected. 

Retrans Time (ms)

Enter the time in milliseconds between neighbor solicitation packet retransmissions.

Max RA Interval

Enter the maximum time between RA messages.

Min RA Interval

Enter the minimum time between RA messages.

Delegate MTU 

from WAN

Select this to have the Router obtain the MTU setting from the service provider or 

uplink router.

Manual

Select this to specify the MTU manually.

MTU

Enter the MTU value.

DAD Attempts

Specify the number of DAD (Duplicate Address Detection) attempts before an IPv6 

address is assigned to the Router LAN interface.

Table 28   Network Setting > LAN > IPv6 LAN Setup (continued)