Vihaan Networks Ltd. RBTS850R2 사용자 설명서
B S S
C
O N F I G U R A T I O N A N D
U
S E R
G
U I D E
Page 16
Commercial in Confidence © VNL
®
2010-2011, All rights reserved
• Base station controller (BSC)
• Base transceiver station (BTS)
• Base transceiver station (BTS)
BSC
The BSC provides all the control functions and physical links
between the mobile switching center (MSC) and BTS. BSC
is a high-capacity switch that provides capabilities such as
handover, cell configuration data, and control of radio
frequency (RF) power levels in BTSs. In an area, the BTS
connects to the BSC through the Abis interface.
The BSC 500i is a table-top equipment. It draws power from
the battery as it is deployed in exchanges.
BTS
The BTS is the radio equipment (transceivers and antennas)
that provides radio access to the mobile stations. It is
required to service each cell in a network. BSS controls a
group of BTSs.
You can configure and monitor BTS and BSC elements in a
network by using operations management center (OMC).
2.1 BSS and OMC Workflow
VNL
®
OMC can operate all nodes of the BSS, transmission,
and power system. The OMC is a functional entity from
where the network operator monitors and controls the BSS.
The purpose of OMC is to offer a cost-effective support for
centralized, regional, local operational, and maintenance
activities that are required for a GSM network.
Each network element supports or implements one or more
network management functions used by OMC.