Vihaan Networks Ltd. RBTS850R2 사용자 설명서

Page 28 

    Commercial in Confidence                           © VNL

®

 2010-2011, All rights reserved 

 

to this trunkport. 

At start-up, the usage type of all trunkports is free and is in 

deactivated state. 

The color scheme differentiates the trunkport states. The 

following colors are associated with the trunkport states: 

•  Green: Trunkport is activated and enabled. 
•  Blue: Trunkport is activated but disabled. 
•  Red: Trunkport is deactivated and disabled. 

You can only activate or deactivate a trunkport but you 

cannot enable or disable the trunkport. When you activate a 

trunkport from OMC, only the activation process is 

performed. The enabling or disabling process is carried out 

by BSC internally. Therefore, there may be a case, when 

you activate a trunkport but the status still shows activated 

and disabled for a trunkport (in blue color). 

LNote

: Some trunkport numbers are displayed in grey 

color, which indicates they are physically absent and you 

cannot perform any action on them. 

You can lock a trunk only if it is unlocked. Similarly, you can 

unlock a trunk only if it is in locked state. 

Perform the below steps to lock/unlock a trunk: 

1.  Open the BSS node in the modify mode.  

2. Expand Inventory, expand Hardware, and click Chassis. 

3. Click the Trunk Config tab.