Vihaan Networks Ltd. RBTS850R2 사용자 설명서
B S S
C
O N F I G U R A T I O N A N D
U
S E R
G
U I D E
© VNL
®
2010-2011, All rights reserved
Commercial in Confidence
Page 59
2. Expand Link and click Link :<IP address>.
3. In the Link tab, select values from TrunkPort ID, Satellite
Flag and Time Slot drop-down lists for trunkport id,
satellite flag, and time slot respectively.
4. Click Modify to save the changes.
You should change the administrative state to unlock after
saving the changes. The operational state changes to
enabled when you change the administrative state to unlock.
LNote
: If the administrative state of link is unlocked then
you cannot change any field of the link. Operational state
may not change to enabled after unlock. For example, if link
is not present physically.
5.1.4 Adding SS7 Route
Perform the following steps to add a SS7 route:
1. Open the BSS node in the modify mode.
2. Expand StackConfig, expand SS7 Stack, expand AIF,
expand SS7 Configuration, expand LinkSet, and
expand LinkSet: <IP address>.
3. Right-click SS7 Route and click Add SS7 Route.
The SS7 Route – Configuration dialog box appears.
The configurable fields of the Configuration – Add Row
dialog box of the SS7 Route configuration are described in
the following table:
Table 15: SS7 Route Configuration Fields
Field Name
Description
Values
Link Set ID
Indicates the link set ID. This
-