Giant Telecom Limited HS-2012BS 사용자 설명서

1

2

3

4

6

5

7

8

13

12

9

10

11

14 15

Ɣ

Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials 
could be released which can cause injury.

Ɣ

To reduce the risk of fire or personal injury, use only the battery listed in User’s Guide.

Ɣ

Keep batteries out of children.

Ɣ

Remove batteries if storing over 30 days.

  Make sure your package includes the following items:

   We cannot guarantee the information which relates to the technical properties or that contained 

in this document is correct. The product and its accessories described in this document are 
subject to constant improvement and further development. For this reason, we reserve the right 
to modify components, accessories, technical specifications and related documentation of the 
product described herein without notification.

1. Unplug the handset cord from phone.
2. Plug the phone cord that is connected to the base into the handset jack on the phone.
 CAUTION: 

Your phone may have two similar jacks. Put the cord only in the jack from which the 

handset came.

3. Plug the handset cord into the handset jack in the bottom of the base.
4. Plug the AC charger into an outlet and into the base’s AC charging jack.
    NOTE: Place the Base unit apart the Desktop Phone at least 15cm to avoid interference.

The headset does not work and damaged if the wrong battery are inserted. Risk of   

explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the 
instruction.

Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. 

USE ONLY WITH PROVIDED ADAPTOR. Using other power supplies may damage the unit.

1. Lift up the door of battery on the headset.
2. Connect the battery plug to the headset plug.
Note:  1. The headset battery is disconnected before shipment.
   

2. Connect the battery plugs carefully without slide the battery out from the Headset.

NOTE:
1. The retaining ring is made with rapid prototype plastic. Adjust the headband slowly and 

carefully.

2. Please do not swap Headset and headband. Each headband is fit for the paired Headset only.

1. Plug handset lifter power cord into handset lifter jack on base. Push firmly into base.
2. Position handset lifter under the handset on your phone. Verify that the lifter is located on  top 

of the telephone speaker.

1. LED Flashing Pattern

  Please observe the following to ensure reliable operation of the headset:

Ɣ

Read this manual thoroughly and observe the operating instructions and information 
provided.

Ɣ

Place the base station on a non-slip surface and lay the connection cables so they cannot be 
the source of an accident.

Ɣ

Do not expose the equipment to extreme temperatures or high relative humidity and protect 
it from direct sunlight and dusty conditions.

Ɣ

Clean the equipment with a soft, damp cloth. Do not use any solvents or aggressive cleaning 
agents.

Ɣ

Only connect approved accessories.

Ɣ

Only use the power plug supplied.

Ɣ

Never open the unit. Opening the unit annuls claims under the terms of guarantee and 
exposes the person to the risk of an electric shock.

Ɣ

Repairs to defective units should only be carried out by service centers recommended by the 
sales outlet.

Ɣ

We recommend removing the batteries if the equipment is not to be used for longer periods.

Ɣ

Only replace the batteries with types recommended by us. Dispose off defective batteries 
according to the applicable local laws (not in household waste). We assume no liability for 
damage caused by using the equipment for unintended purposes.

Ɣ

European Communities (EC) RF Radiation Exposure Statement: The installation of the base 
unit should allow at least 20 centimeter between the base and persons in compliance with 
EC RF exposure Council Recommendation

1     Slide Swich

2     Talk/End key

3     Mute key

4     LED 

5     Name Card

 6      LED

 7      LED 

 8      Microphone

 9      Microphone +/- key

10     Register key 

11     Listening +/- key

12     Power jack

13     Lifter 

14     Phone

15     Handset

Base unit

Electrical outlet

AC-DC adaptor for base unit

Desktop phone

Lifter

2. Place the headset cushion onto the 
    headset speaker..

1. Snap the headset speaker into the retaining 
    ring of desired wearing position

Flashing Pattern

LED ON-OFF sequence

Normal flashing

ON (1 sec), OFF (1 sec)

Fast flashing

ON (250 ms), OFF (250 ms)

Moderate Flashing

ON (500 ms), OFF (500 ms)

Slow flashing

ON (2 sec), OFF (2 sec)

Very slow flashing

OFF (8 sec), ON (2 sec), OFF (2 sec) ,

ON (2 sec)

Packing contents

Solo pack

Base Station

1

Wireless Headset

1

AC-DC adaptor

1

Li-Polymer battery pack

for the Wireless Headset

1

Head Band

1

Telephone Handset Lifter

Optional

Ear hook

Packing contents

Solo pack

Name Tag

Manual

2

4

4

1

Headset Cushion