Philips Electronics Singapore Pte Ltd RC2843003 사용자 설명서
Features and Functions
Use the remote control’s keys to perform
actions described below.
To enter STB setup
mode.
When a valid TV code is
programmed, to enter
TV setup mode.
When a valid TV code
is programmed, to
power off or on TV.
To enter a number or
select a channel
number.
To reserve for future
use.
When a valid TV code
is programmed, to
select TV input
source.
To enter STB menu.
To enter STB guide.
To navigate through
display menu.
To confirm an action.
To turn STB audio off
or on.
When a valid TV code
is programmed, to turn
TV audio off or on.
To increase/decrease
volume on the STB.
When a valid TV code
is programmed, these
keys will control the
TV volume.
To recall STB previous
channel.
To select
previous/next channel
on the STB.
To display program
information or other
menu options.
To exit STB menu.
To switch between
different languages
and audio options,
when available on the
STB.
Installing Batteries
The remote control requires 2 AAA size
(1.5V) batteries.
1. On the back of the remote control, press
the battery cover tab, lift and remove the
battery cover.
2. Insert 2 AAA-size batteries, matching
the (+) and (–) symbols shown on the
battery compartment.
3. Put back the battery cover. Test the
remote control by press and hold Setup
key for 3 seconds, the Red LED
indicator at top right will blink twice.
RF Pairing with STB
Method of pairing:
1. Press Setup key until the LED indicator
blinks twice.
2. Press Info key until 3 random digits are
displayed on TV screen, the LED
indicator turns on.
3. Enter the 3 random digits numeric
displayed on TV screen to pair the
remote control with target STB. When
each digit key has been pressed and
released, the LED indicator acts a
reverse blink.
4. The LED indicator will blink twice once
the remote control has been paired with
the target successfully. Otherwise if
pairing is unsuccessful, the LED
indicator will blink 5 times and the
remote control returns to user mode.
Notes:
•
•
In Step 3, STB will display 3 random
digits on TV screen, you need press first
digit within 8 seconds, for second and
third digits, you have to press the digit
within 4 seconds.
•
If timeout occurs, the LED indicator will
blink 5 times and the remote control
returns to user mode.
•
You also can interrupt the pairing during
Validation Process by pressing Info key.
•
If pairing is interrupted by pressing Info
key, or pairing failed, the LED indicator
will blink 5 times, and the remote control
returns to user mode.
•
Pairing distance not more than 2 meters.
Programming to control TV
device
device
There are two ways to do this. If your
device is listed in the Code List at the end
of this Manual, you can use section A. If
your device is not listed, you will need to
use section B.
A. Manually
1. Press and hold the Setup key until the
LED indicator blinks twice.
2. Enter the appropriate 4-digit setup code
for TV (from the Code List) by pressing
the number keys (0-9) on the remote
control.
•
If the LED indicator blinks twice, a
correct code has been entered.
•
If the LED indicator blinks 5 times, an
invalid code has been entered. Start
over at step 1.
Notes:
If you are interrupted while you are
programming, the remote control may
timeout before you complete the code
setup and you will need to start over.
This is indicated by the LED indicator
blink 5 times, and returns to user mode.
B. Using the Automatic Search
1. Press and hold the Setup key until the
LED indicator blinks twice.
2. Enter 991 by pressing the number keys
on the remote control, the LED indicator
will blink twice.
3. Press and hold the key, until the
TV turns off. Release the key.
4. You can control TV with the 5 keys
which are TV power, Input, Mute,
Volume Up and Volume Down.
5. Press OK and EXIT key together to exit
automatic search mode.
•
For step 3, code search will start 1.5
seconds after press and hold the TV
power
key.
•
At step 4, you have to short press the
TV power
key. For long press of more
than 1.5 seconds will trigger remote to
automatic search for next code. Until
step 5 which exit the automatic search
mode.
•
If you want to continue to automatic
search for next code, repeat step 3.
•
If an invalid code has been entered at
step 2, the LED indicator will blink 5
times and return to user mode. Start
over at step 1.
Changing Volume control
The remote is set to control volume level of
STB. Once a valid TV code is
programmed, the volume keys will control
the TV volume.
A. Change volume control from TV to
STB
1. Press and hold the Setup key until the
LED indicator blinks twice.
2. Enter 993 by pressing the number keys
on the remote control, the LED indicator
will blink twice.
3. Press and release number key 1, the
LED indicator will blink twice.
•
If an invalid code has been entered at
step 2, the LED indicator will blink 5
times and return to user mode. Start
over at step 1.
•
If 15 seconds timeout occurs, the LED
indicator blinks 5 times and returns to
user mode.
B. Change volume control from STB to
TV
TV
1. Press and hold the Setup key until the
LED indicator blinks twice.
2. Enter 993 by pressing the number keys
on the remote control, the LED indicator
will blink twice.
3. Press and release number key 2, the
LED indicator will blink twice.
•
If an invalid code has been entered at
step 2, the LED indicator will blink 5
times and return to user mode. Start
over at step 1.
•
If 15 seconds timeout occurs, the LED
indicator will blink 5 times and return to
user mode.
Check TV Code been set to the
remote
If you need to check the TV code that been
set to the remote, you can follow the steps
below.
1. Press and hold the Setup key until the
LED indicator blinks twice.
2. Enter 990 by pressing the number keys
on the remote control, the LED indicator
will blink twice.
3. To view the first code, Press number key
1
, release the key and count on the
number of LED indicator blink. (For
example, 3 blinks, the code digit is 3)
Note: If code digit is 0, then the LED
indicator will not blink.
4. Repeat step 3 for second, third and
fourth digit. Press number key 2 for
second digit; Press number key 3 for
third digit; Press number key 4 for fourth
digit.
•
If an invalid code has been entered at
step 2, the LED indicator will blink 5
times and return to user mode. Start
over at step 1.
Resetting TV Configuration
Settings
Settings
1. Press and hold the Setup key until the
LED indicator blinks twice.
2. Enter 996 by pressing the number keys
on the remote control, the LED indicator
will blink twice.
•
If an invalid code has been entered at
step 2, the LED indicator will blink 5
times and return to user mode. Start
over at step 1.
Care of your Remote Control
Do not use your Remote Control in other
ways that it was designed for. Prevent
water or other liquids from damaging your
Remote Control.
Check your batteries to ensure no leaking
batteries are used. For optimum
performance, change the batteries after 6
to 9 months.
Troubleshooting
1. The LED indicator is off when you press
the remote keys:
•
Check batteries whether are correctly
installed or not.
•
Change batteries if needed.
2. The LED indicator blinks but the remote
control cannot function when you press
the remote keys:
•
Check the power of STB.
•
Power Off then On the STB, and try to
do pairing of remote and receiver.
FCC ID: RCSRC2843003
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
You are cautioned that changes or
modifications not expressly approved by
the party responsible for compliance could
void your authority to operate this
equipment.
Huawei Remote
Control User Guide
Warning: Please do not point
the IR LED to eyes directly.