PC Worth International Co. Ltd. MBC6890 사용자 설명서
-6-
Install Your MBC6890
To use your MBC6890, please follow the instruction step by step as below:
1. Charge battery for at least 4 hours for the first time.
n
Connect the power to Smart Cradle.
n
Load battery pack into the battery charging well for at least 4 hours. (for the first time only)
2. Install Smart Cradle
n
Power off Host computer.
n
Connect the power to Smart Cradle.
n
Connect desired interface cable between Smart Cradle and host computer.
n
Power on Host computer.
n
Make sure the COM port is not occupied by other host application if RS232 Serial cable is used.
3. Install Scanner
n
Place battery pack into scanner and close battery cover.
n
Add connection cap at the end of scanner holder.