Itron Inc. OW1 사용자 설명서

Chapter 5 Installation

The Base Meter used with the Socket Based Router may be installed and powered up prior
to the installation of the Router Box. Base Meter installation must be compliant with the
generally accepted technical rules for the installation of electrical and telecommunication
equipment valid in your jurisdiction. This feature allows the Router Box to be installed,
serviced or exchanged without disrupting power to the residence.

Base Meter

Safety

Meter installation must be compliant with the generally accepted technical rules for the
installation of electrical and telecommunication equipment valid in your jurisdiction.

The electrical utility dictates the safety procedures for meter installations. Please check with
the local electrical utility for these safety procedures.

Install the meter in accordance with the voltage and current specifications printed on the
front panel and the wire and environmental specifications given in the installation
information.

Do not install the meter if it is damaged.

Do not install the meter if it has been dropped or otherwise subjected to significant impact
even if no damage can be seen.

Do not use the meter for primary protection purposes.

Unpacking and Inspection

Upon receipt:

• Check the condition of the packaging to ensure there was no damage during shipment.
• Verify that the packaging label matches the order.
• Inspect for obvious damage to the cover, base, and meter assembly.
• Compare the meter and register nameplates to the record card and invoice. Verify the

type, class, voltage, form number, and other pertinent data.

• Verify that the Itron meter seals are in place.

As with all precision electronic instruments, the meter should be handled with care. Follow
these precautions when handling the meter:

TDC-xxxx-xxx DRAFT

13