Itron Inc. OW1 사용자 설명서

Chapter 6 Configuration

Initial Setup

This section assumes that the SBR Customer configuration is not loaded by the factory. This
is meant for initial SBR Evaluation samples setup, only. For changes following initial setup,
use the HTTP interface with Advanced REST Client (ARC) tool in the Configuration and
Monitoring section.

Login

An SSH server is available for the user to connect to the SBR. To connect to the SBR using
WiFi setup a hotspot using the configured SSID/Password given with customer shipment
information. After which you can SSH into the SBR with the provision IP from the hotspot.
ior login via serial console. A serial console (UART0) is also enabled.
Table : Example

Ubuntu 16.04.3 LTS sbr-0-3-8 ttyS0
sbr-0-3-8 login:_

On both interfaces, the username isitron and the password is provided on customer
shipment information.
Table : Example

Last login: Fri Nov 10 13:18:33 EST 2017 from 172.17.212.30 on pts/1
Welcome to Ubuntu 16.04.3 LTS (GNU/Linux 4.10.0-37-generic x86_64)

* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com

* Support: https://ubuntu.com/advantage

48 packages can be updated.
23 updates are security updates.

itron@sbr-0-3-8:~$ _

SBR Configuration Script

The SBR includes a configuration script which allows the user the edit various configuration
variables. By default, it is in /home/itron/sbrconfig.sh and can only be run as root or
with sudo.

TDC-xxxx-xxx DRAFT

18