Itron Inc. OW1 사용자 설명서

Table : Example

itron@sbr-test123-0-3-8:~$ sudo ./sbrconfig.sh ntp_config your.ntp.server
Parameter Count 2
NTP Configuration your.ntp.server
Setting NTP Server to your.ntp.server

ii) External Syslog Server

sudo ./sbrconfig.sh syslog_server <Syslog server IP address>

Table : Example

itron@sbr-test123-0-3-8:~$sudo ./sbrconfig.sh syslog_server your.syslog.server
Parameter Count 2
syslog Server Address your.syslog.server
Setting Syslog Server to your.syslog.server

Enabling Itron Service(s)

Enable mctrld

sudo systemctl enable mctrld

Start mctrld

sudo systemctl start mctrld

Table : Example

itron@sbr-test123-0-3-8:~$ sudo systemctl enable mctrld
mctrld.service is not a native service, redirecting to systemd-sysv-install
Executing /lib/systemd/systemd-sysv-install enable mctrld
itron@sbr-test123-0-3-8:~$ sudo systemctl start mctrld

The SBR will then connect to the LTE network and register to the CE. After this point, you
can use the HTTP interface with ARC for monitoring and to make any additional
configuration changes which are listed in the Configuration and Monitoring section.

Note: For certain configuration item(s) like SBR ESN, Base Meter ESN, APN, a system
reboot is required for the changes to take effect. This may be required after changing Test
Environments, if not handled by runtime configuration changes in the Configuration and
Monitoring section.

Configuration and Monitoring

The RESTful Web Services client, i.e. ARC, should only be used after Itron services have
been enabled and started as described in the SBR Configuration Script section.

Configuration

TDC-xxxx-xxx DRAFT

Proprietary and Confidential