ZTE Corporation WF723S 사용자 설명서
Set Up Your Device
5
Battery Charge
(solid = plugged
in/charging;
blinking = using
battery)
in/charging;
blinking = using
battery)
Yellow blinking
20%~49% discharging
Red solid
Less than 20% charging
Red blinking
Less than 20%
discharging
Off
No battery installed
Signal Strength
Network
Network
Network and 1-4 bars solid
green
green
Weak (1 bar) to strong (4 bars) signal
Network and bars blinking
red
red
Device unable to be used as normal
Network steady red, bars off
Limited or no service, searching,
CDMA register failed
CDMA register failed
Battery Use
The following topics explain how to insert and remove your device
’s battery.
Battery Cautions
Storage: Avoid storing or leaving battery with no charge remaining. Saved information and settings
may become lost or changed, or battery may become unusable. Charge once every six months
before storing or leaving unused for a long period.
may become lost or changed, or battery may become unusable. Charge once every six months
before storing or leaving unused for a long period.
Bulges: Depending on use, bulges may appear near end of battery life. This does not affect safety.
Replacing Battery: The battery is a consumable item. It needs to be replaced if operating time
shortens noticeably. Purchase a new battery.
shortens noticeably. Purchase a new battery.
Cleaning: Clean soiled terminals between battery and device with a clean, dry cotton swab. Soiled
terminals can result in a poor connection and prevent charging, etc.
terminals can result in a poor connection and prevent charging, etc.