GSOU Technology Co. LTD BTV7 사용자 설명서
2200mAh
SPECIFICATIONS >>>
WARRANTY POLICY >>>
Your Bluetooth speaker is covered by a limited warranty. It is backed by 1 year performance warranty against any manufacturing defects in
material or workmanship from the date of original purchase. This warranty entitles the purchaser to get the product repaired or replaced under
the following conditions:
◆The warranty applies to the original purchase, Proof of original purchase is required
◆The warranty does not cover the damage caused by misuse, abuse or improper storage.
◆In no event shall be responsible for any direct, incidental, consequential or other damages of any kind.
material or workmanship from the date of original purchase. This warranty entitles the purchaser to get the product repaired or replaced under
the following conditions:
◆The warranty applies to the original purchase, Proof of original purchase is required
◆The warranty does not cover the damage caused by misuse, abuse or improper storage.
◆In no event shall be responsible for any direct, incidental, consequential or other damages of any kind.
The company reserves the right to the product modification for appearance and function,which is subject to change without prior notice.
OPTIONAL*
Driver spec：
Size：
Net weight：
Frequency response：
Sensitivity：
S/N ratio：
Distortion：
Working distance：
Transmission Power：
Bluetooth profiles：
Working current：
Working voltage：
Charging voltage：
Charging current：
Battery capacity：
Static standby current under shuttdown status ：
Static standby current under power on status ：
Charging time：
Playtime at full volume :
Playtime at 60% volume :
Waterproof :
Size：
Net weight：
Frequency response：
Sensitivity：
S/N ratio：
Distortion：
Working distance：
Transmission Power：
Bluetooth profiles：
Working current：
Working voltage：
Charging voltage：
Charging current：
Battery capacity：
Static standby current under shuttdown status ：
Static standby current under power on status ：
Charging time：
Playtime at full volume :
Playtime at 60% volume :
Waterproof :
Φ52mm 4Ω/5Wx2
L204.5*W53.5*H75.0 mm
352g +/-5g
100HZ - 20KHZ
80dB
≥75dB
≤0.3% @ 1W
about 33 feet/ 10M
Class2, ≤4dbm
A2DP, AVRCP, HFP
≤700mA
3.3 - 4.2V
DC 5V
≤800MA
L204.5*W53.5*H75.0 mm
352g +/-5g
100HZ - 20KHZ
80dB
≥75dB
≤0.3% @ 1W
about 33 feet/ 10M
Class2, ≤4dbm
A2DP, AVRCP, HFP
≤700mA
3.3 - 4.2V
DC 5V
≤800MA
≤110 uA
≤25mA
about 3-4 hours
about 3 hours
about 11 hours
IPX6
≤25mA
about 3-4 hours
about 3 hours
about 11 hours
IPX6
AUX-IN
CABLE*
USB
CHARGE
CABLE
V7 BLUETOOTH SPEAKER
MANUAL
*
CONTAIN >>>
IPX6 : No harm for 3-5 minutes water flushing, but don't soak!
OTHER >>>
Note：Your speaker will power off automatically within 15 minutes if you did not pair it with playback devices in order to save energy.
Blue indicator flashes
Blue indicator remains steady on
Blue indicator remains steady on
Red indicator flashes
Red charging indicator on
Status of pairing.
Connected to Bluetooth® source or connected to aux-in/Micro SD Card devices.
Connected to Bluetooth® source or connected to aux-in/Micro SD Card devices.
Battery voltage lower than 3.4V , Red light flashes means your speaker needs charging.
Red indicator is on when charging , and off when fully charged.
Charging via a computer through a USB cable or buy a USB charger separately.
Charging
Indicator
Reset
If the device is crashed, please inserting a fine needle-like object into the AUX connector.
FCC WARNING >>>
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
1、Support Micro SD max 32GB.
2、Micro SD support format:MP3,WMA,WAV,FLAC,APE.
2、Micro SD support format:MP3,WMA,WAV,FLAC,APE.
1、Bluetooth button：In Bluetooth mode, long press the M button, disconnect the current connection, and the blue indicator light flashes.
2、Mode switch button：Short press the M button, you can switch among Bluetooth /Micro SD /Aux in modes.
3、Answer/reject call button：When the phone rings short press for answering,long press for rejecting call.
4、TWS pairing button：After power on（speaker will be in Bluetooth standby mode,the Blue indicator flashes)
long press M for get into TWS pairing mode.
2、Mode switch button：Short press the M button, you can switch among Bluetooth /Micro SD /Aux in modes.
3、Answer/reject call button：When the phone rings short press for answering,long press for rejecting call.
4、TWS pairing button：After power on（speaker will be in Bluetooth standby mode,the Blue indicator flashes)
long press M for get into TWS pairing mode.
1、Two kinds of EQ modes : indoor EQ mode(Indoor version: focus on the low and medium frequency, sounds more comfortable and soft.)
outdoor EQ mode(Outdoor version: more emphasis on medium and high frequency, louder vocals, greater range of transmission.)
2、By default it will be on the indoor EQ mode , press EQ Switch Button to switching different EQ.
3、The indoor EQ mode prompt "Di" and the outdoor EQ mode prompt "Di Di".
4、EQ memory mode : speaker will memory the EQ as the last shutdown.
outdoor EQ mode(Outdoor version: more emphasis on medium and high frequency, louder vocals, greater range of transmission.)
2、By default it will be on the indoor EQ mode , press EQ Switch Button to switching different EQ.
3、The indoor EQ mode prompt "Di" and the outdoor EQ mode prompt "Di Di".
4、EQ memory mode : speaker will memory the EQ as the last shutdown.
INTRODUCTION >>>
FUNCTIONS >>>
BLUETOOTH SPEAKER MANUAL
V7
AUX in Jack/Reset
DC IN
Micro SD*
Bluetooth button \ Mode switch button
Answer,reject call\TWS pairing button
Status indicator
Power On/Off
Play/Pause button
EQ switch
Connect to your device
Setting>Bluetooth>
Choose device>V7
Connected successfully
Status indicator steady on
Setting>Bluetooth>
Choose device>V7
Connected successfully
Status indicator steady on
2
HOW TO CONNECT >>>
Long press the power on/off button
for 3 seconds and it will be in
Bluetooth mode,
the Blue indicator flashes
for 3 seconds and it will be in
Bluetooth mode,
the Blue indicator flashes
1
Mic
Short press Next Track/Long press Vol+
Short press Previous Track/Long press Vol -
Charging indicator
AUX mode: long press / and short press + /- is invalid
Multifunction Button
Micro SD Card
Equalize
TWS pairing
TWS :True Wireless Stereo
1、After the two speakers are turned on , the speakers will enter in bluetooth mode(the indicator light flashes ). Long press M button of any speaker ,
the speakers will enter in bluetooth pairing mode ;When the prompt tone"Di Di"sounded ( it is the main speaker )，
the speaker will automatically search for another speaker.
2、Speakers will be in TWS mode when you hear prompt tone(the main speaker ) ,which means pairing successfully between 2 speakers.
The blue indicator of main speaker is flashes,and blue indicator of auxiliary speaker is keeps on.
(The main speaker as left channel,and the auxiliary speaker as right channel.)
3、After pairing successfully between 2 speakers,the volume of main speaker and auxiliary speaker is synchronous.
The button of main speaker and auxiliary speaker can control next/last track and pause on TWS mode.
4、Open the bluetooth of moblie,search and connect the main speaker,the blue incicator of main speaker will keeps on after connected successfully.
5、Long press the M button will disconnect TWS.
6、Long press the M button of main speaker will disconnect the bluetooth between moblie and main speaker.
the speakers will enter in bluetooth pairing mode ;When the prompt tone"Di Di"sounded ( it is the main speaker )，
the speaker will automatically search for another speaker.
2、Speakers will be in TWS mode when you hear prompt tone(the main speaker ) ,which means pairing successfully between 2 speakers.
The blue indicator of main speaker is flashes,and blue indicator of auxiliary speaker is keeps on.
(The main speaker as left channel,and the auxiliary speaker as right channel.)
3、After pairing successfully between 2 speakers,the volume of main speaker and auxiliary speaker is synchronous.
The button of main speaker and auxiliary speaker can control next/last track and pause on TWS mode.
4、Open the bluetooth of moblie,search and connect the main speaker,the blue incicator of main speaker will keeps on after connected successfully.
5、Long press the M button will disconnect TWS.
6、Long press the M button of main speaker will disconnect the bluetooth between moblie and main speaker.
Through bluetooth connected,same 2 speakers will automatic identify opposite,left and right channels will automatic switch,and combine into stereo.
1 plus 1 combine to use,double sound effect.
(2 speakers connected 1 mobile phone at the same time,play music synchronously.)
1 plus 1 combine to use,double sound effect.
(2 speakers connected 1 mobile phone at the same time,play music synchronously.)
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.