BMI Technologies Inc. RFVI 사용자 설명서

DRAFT G FORCE PLUS RF Instruction Manual 

 

 

Doc #RF1 Rev.9 

Apr/08 

3.  Press {4} when the Data Logger displays “Action?(1-9)”.  The Data Logger will display “Action?(1-9) 

Events from Veh” 

4.  Press {Enter} to accept the choice.  The Data Logger will display “Ready for Events XXXX/1500” 

5.  Present the Data Logger to the Vehicle Interface.   

6.  Listen for a sequence of three quick beeps to indicate the interaction is complete. 

7.  Remove the Data Logger from the Vehicle Interface.  The Vehicle Interface will display “MAINT 

LOCK OUT YYYY/MM/DD HH:MM” 

8.  Press {Cancel} on the Data Logger.  The Data Logger will display “Action?(1-9)” 

9.  Remove the Vehicle from Maintenance Lockout. 

 
 
 
 
 
 
 
 
 

 
1.  Press {Enter} to start the Data Logger. 

2.  Press {1} when the Data Logger displays “Action?(1-9)”.  The Data Logger will display “Action?(1-9) 

Events to PC” 

3.  Press {Enter} to accept the choice.  The Data Logger will display “Ready for PC” 

4.  Present the Data Logger to the Software Interface. 

5.  Start the Fleet Manager Software (optionally select the Events tab). 

6.  Select Download | Events | Data Logger from the menu.  The status bar at the bottom left of the 

Software will provide progress information. 

 

 

 

 

7.  Click the [OK] button to confirm completion. 

 

8.  Remove the Data Logger from the Software Interface.  The Data Logger will display “No Events!” 

9.  Press {Cancel} on the Data Logger.  The Data Logger will display “Action?(1-9)”