BMI Technologies Inc. RFVI 사용자 설명서
DRAFT G FORCE PLUS RF Instruction Manual
Doc #RF1 Rev.9
53
Apr/08
Based on the settings, the Vehicle Monitor measures the voltage of the Vehicle’s battery and determines which of
four battery states the Vehicle Interface displays.
DO NOT CHARGE
Charging in the Do Not Charge state increases water consumption, wastes energy, and reduces battery life.
When the battery meets the criteria for Do Not Charge, the Vehicle Interface displays “BATTERY DO NOT
CHARGE” and the Battery Charge LED is green.
OK TO CHARGE
Charging in the Ok To Charge state produces good lifetime battery capacity.
When the battery meets the criteria for OK To Charge, the Vehicle Interface displays “BATTERY OK TO
CHARGE” and the Battery Charge LED is amber.
Audible alarms for the OK To Charge state are defined in the System Settings and include:
No alarm for OK To Charge, or
Vehicle Interface buzzer only (½-second every 60 seconds), or
Vehicle Interface buzzer and horn (alarm pattern as determined by System Settings)
MUST CHARGE
Charging in the Must Charge state produces maximum lifetime battery capacity, the greatest number of shifts
per charge, and the lowest per ampere charging costs.
When the battery meets the criteria for Must Charge, the Vehicle Interface displays “BATTERY MUST
CHARGE!” and the Battery Charge LED flashes red. The buzzer sounds for 2 seconds every 30 seconds.
Audible alarms for the Must Charge state are defined in the System Settings and include:
Vehicle Interface buzzer only (2 seconds every 15 seconds), or
Vehicle Interface buzzer and horn (alarm pattern as determined by System Settings)
Vehicle behavior for the Must Charge state is defined under Authorization Group settings and includes:
No specific behavior, or
Immediate lift interrupt and/or secondary alarm, or
Delayed lift interrupt and/or secondary alarm (delay as determined by Authorization Group settings)
NOTE!
Contact Technical Assistance at BMI Technologies Inc. at 1-800-563-8867
for assistance in determining optimal Battery settings for
each Authorization Group.