Tyco Safety Products / Software House PI26 사용자 설명서
apC/8X Basics
1-2
apC/8X Technical Manual
apC/8X Basics
The apC/8X controller is housed in a 16 AWG metal wall-mounted cabinet,
which has tamper switches on the front and rear and can be used in a variety
of configurations.
which has tamper switches on the front and rear and can be used in a variety
of configurations.
The standard apC/8X panel has eight inputs, eight outputs, and one RS-485
reader port that can support a maximum of eight readers.
reader port that can support a maximum of eight readers.
In the basic apC/8X installation, the eight card readers are wired in a daisy
chain configuration. Installing a Star Coupler or Mini Star Coupler enables
you to wire the apC/8X’s eight card readers in a star configuration, daisy
chain configuration, or a combination of configurations.
chain configuration. Installing a Star Coupler or Mini Star Coupler enables
you to wire the apC/8X’s eight card readers in a star configuration, daisy
chain configuration, or a combination of configurations.
Note: As many as 16 apC/8X units can be connected in a
communications chain. However, for best results, the
recommended maximum number of apC/8X units per chain is
nine. On a network connection, the recommended maximum
number of apC/8X units is six.
recommended maximum number of apC/8X units per chain is
nine. On a network connection, the recommended maximum
number of apC/8X units is six.
The static RAM of the panel consumes minimal power for storing memory
and data. The panel is capable of serial RS-232 bus/daisy chain RS-485 or
dual-line communications with an optional board. (Optional boards are
described in “apC/8X Optional Modules,” on page 1-4.)
and data. The panel is capable of serial RS-232 bus/daisy chain RS-485 or
dual-line communications with an optional board. (Optional boards are
described in “apC/8X Optional Modules,” on page 1-4.)
The apC/8X panel is compatible with the Software House C•CURE 800/8000
system.
system.
Software-Controlled Options
The apC/8X device offers software-controlled features such as timed
activation/deactivation commands, 32-bit card numbers, elevator access,
dialup mode operation, and antipassback control.
activation/deactivation commands, 32-bit card numbers, elevator access,
dialup mode operation, and antipassback control.
A single apC/8X device can use multiple card technologies, site codes, and
facility codes. The apC/8X full-year real time calendar/clock allows
activation and deactivation of cards on specified days.
facility codes. The apC/8X full-year real time calendar/clock allows
activation and deactivation of cards on specified days.