EnOcean GmbH PTM330U 사용자 설명서
USER MANUAL
V1.2
© 2010 EnOcean | www.enocean.com
PTM 33x / PTM 33xC / PTM 330U User Manual V1.2 | Page 4/27
PTM 33X / PTM 33XC / PTM 330U
1
RELATED DOCUMENTS
Proposal for mechanical integration with ECO 200 in 2D and 3D format
Footprint with positions of pads available in Protel and Gerber format
AN102: Antenna Basics – Basic antenna design considerations for EnOcean based prod-
ucts
2
GENERAL DESCRIPTION
2.1 Basic Functionality
The radio transmitter module PTM 330 from EnOcean en-
ables the implementation of wireless sensors and switches
without batteries.
Key applications are handheld remote controls or industrial
switches.
Functional Principle
When an energy pulse is supplied (e.g. by ECO 200 from
EnOcean) an RF telegram is transmitted including a unique
32-bit module ID, the polarity of the energy pulse, and the operating status of 4 digital in-
puts. The RPS telegram content can be configured if other content is needed.
PTM 330 can be connected to ECO 200 via a contact spring. There are two meander struc-
tures on the PCB which allow usage of a rubber pad to set the level of two digital inputs.
Alternatively PTM 330 can be mounted as an SMD component onto a host PCB. In this case
energy supply pins and digital input pins are accessible via contact pads.
ables the implementation of wireless sensors and switches
without batteries.
Key applications are handheld remote controls or industrial
switches.
Functional Principle
When an energy pulse is supplied (e.g. by ECO 200 from
EnOcean) an RF telegram is transmitted including a unique
32-bit module ID, the polarity of the energy pulse, and the operating status of 4 digital in-
puts. The RPS telegram content can be configured if other content is needed.
PTM 330 can be connected to ECO 200 via a contact spring. There are two meander struc-
tures on the PCB which allow usage of a rubber pad to set the level of two digital inputs.
Alternatively PTM 330 can be mounted as an SMD component onto a host PCB. In this case
energy supply pins and digital input pins are accessible via contact pads.
Product variants
PTM 330: 868 MHz variant, pre-installed whip antenna, delivery in card board box
PTM 332: 868 MHz variant, no pre-installed antenna, delivery as tape & reel
PTM 330C: 315 MHz variant, pre-installed whip antenna, delivery in card board box
PTM 332C: 315 MHz variant, no pre-installed antenna, delivery as tape & reel
PTM 330U: 902 MHz variant, pre-installed whip antenna, delivery in card board box
2.2 Technical Data
Power supply
ECO 200 or equivalent energy pulse
Antenna
pre-installed whip antenna PTM 330/330C/330U
external 50 Ohm or whip antenna PTM 332/332C
Frequency
868.3 MHz (PTM 33x) / 315.0 MHz (PTM 33xC) / 902.875 MHz (PTM 330U)
Transmission power
typ. 3 dBm at antenna base
Data rate / Modulation type
125 kbps / ASK(315MHz, 868MHz), FSK(902MHz)
Telegram type
RPS of type 2 (allows interpretation of operating two buttons simultaneously)
Digital inputs
4
Transmission range
up to 200 m free field, up to 30 m indoor