TP-Link Technologies Co. Ltd. TDW8968V1 사용자 설명서

 

25 

¾

  PPP Username/Password/Confirm Password: Enter the User Name, Password and 

Confirm Password provided by your ISP. These fields are case-sensitive. 

¾

  Authentication Method: Select the Authentication Method from the drop-down list, the 

default method is AUTO_AUTH, and you can leave it as a default setting. 

¾

  Choose the right connection type according to your needs: For PPPoE connection, you 

can select Connect on demand or Connect automatically or Connect manually. Connect 
on demand is dependent on the traffic. If there is no traffic (or Idle) for a pre-specified period 
of time), the connection will tear down automatically. And once there is traffic send or receive, 
the connection will be automatically on. 

Click Advanced, advanced selections for WAN Service Setup can be shown. 

¾

  Service Name/Server Name: Enter the Service Name and Server Name if it was provided by 

your ISP. You can leave them blank, if the ISP doesn’t provide them. 

If your ISP provides a PPPoA connection and you need to use an ATM Interface, choose PPPoA 
in the drop-down list, and then the screen will be displayed as below. 

The configuration is similar to PPPoE. Please refer to the section 

 to configure this 

part.