TP-Link Technologies Co. Ltd. WR841NXV9 사용자 설명서

 

TL-WR841N/TL-WR841ND

 

-42- 

1.  Enter the appropriate MAC Address into the MAC Address field. The format of the MAC 

Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 

00-0A-EB-00-07-8A.  

2.  Enter a simple description of the wireless station in the Description field. For example: 

Wireless station A. 

3.  Status - Select Enabled or Disabled for this entry on the Status pull-down list. 

4. Click 

the 

Save button to save this entry. 

To modify or delete an existing entry: 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

Click the Next button to go to the next page   

Click the Previous button to return to the previous page. 

For example: If you desire that the wireless station A with MAC address 00-0A-EB-00-07-8A and 

the wireless station B with MAC address 00-0A-EB-00-23-11 are able to access the router, but all 

the other wireless stations cannot access the router, you can configure the Wireless MAC Address 

Filtering list by following these steps: 

1. Click 

the 

Enable button to enable this function. 

2.  Select the radio button: Allow  the stations specified by any enabled entries in the list to 

access for Filtering Rules. 

3.  Delete all or disable all entries if there are any entries already. 

4. Click  the  Add New... button and enter the MAC address  00-0A-EB-00-07-8A 

/00-0A-EB-00-23-11  in the MAC Address field, then enter wireless station A/B in the 

Description field, while select Enabled in the Status pull-down list. Finally, click the Save 

button. 

The filtering rules that configured should be similar to the following list: