Dimplex North America LTD 300032 사용자 설명서

Remote display 

Up button 

Left Button 

Flame ON/OFF button 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
FLAME ON/OFF BUTTON 
Press the Flame On/Off button       to turn the flame ON. 

 

HEATER ON/OFF BUTTON 
Press the Heater On/Off button       to turn the heater 

 

NOTE 
A red indicator light will illuminate on the fireplace to indicate that the heater is ON. 
NOTE 
When the flame and/or the heater are ON, the unit will turn OFF when both control buttons      
are pressed at the same time. 

 

1.  Set the sleep timer to the length of time you want the unit to operate by pressing the 

sleep timer     button. 

NOTE 
The sleep timer can be set from 30 minutes to 8 hours. 
2.  Pressing the sleep timer button repeatedly will increase the sleep timer by 30 minute 

increments.   

3.  Press the flame      button and/or the heater      button to turn the unit ON. 
4.  The fireplace will automatically turn OFF when the sleep timer reaches 0 minutes. 
5.  The sleep timer can be reset by pressing the sleep timer     button repeatedly until the 

sleep timer display disappears and the room temperature display is shown. 

 

1.  Press the ENTER button until the middle display        flashes. 
2.  Use the direction buttons on the hand held remote to move the cursor to the      clock 

and press the ENTER button. 

3.  A day of the week will flash. 
4.  Use the left or right button to set the day of the week. 

Right

button

Down

button

Sleep timer 
button 

Heater ON/OFF button 

Enter button 

Occupancy 

Sensor 

Set temperature 

Day of week 

Room temperature 

Time of day

Ambient Light

Sensor 

Batteries