Impinj Inc. XARRAY 사용자 설명서
Speedway Revolution Installation and Operations Guide Octane 4.11
Chapter 3: Configuring and Monitoring
Chapter 3: Configuring and Monitoring
24
Revision 4.11 Copyright ©2014, Impinj, Inc.
Table 3.1: Show network Command Parameters
Parameter
Displayed Information
dhcp
Summary of DHCP client configuration
dhcp
Summary of DNS settings
icmp
ICMP statistics
ip
IP statistics
ntp
Summary of NTP settings
summary
Summary of network settings
Parameter
Displayed Information
tcp
TCP statistics
udp
UDP statistics
For details about the specific settings and statistics available for each of these parameters,
see the RShell Reference Manual.
see the RShell Reference Manual.
Viewing RFID Parameters and Statistics
Use the RShell show rfid stat command to display a Reader‘s RFID parameters and
statistics. Using this command with the appropriate parameter, you can view information
shown in the Parameter and display table below.
statistics. Using this command with the appropriate parameter, you can view information
shown in the Parameter and display table below.
Table 3.2: Partial listing of show rfid stat parameters
Parameter
Displayed Information
ReaderOperationalStatus
Indicates whether RFID applications are
running on the Reader
running on the Reader
Antenna<n>OperationalStatus
Indicates if an antenna is physically connected
to the Reader and operating properly. Note that
<n> indicates the antenna port on the Reader
(1-4).
to the Reader and operating properly. Note that
<n> indicates the antenna port on the Reader
(1-4).
Antenna<n>EnergizedTime
Indicates the time that antenna<n> has been
powered, in milliseconds.
powered, in milliseconds.
Antenna<n>UniqueInventory-Count
Indicates the number of unique tags seen at
antenna<n>
antenna<n>
Antenna<n>TotalInventory-Count
Indicates the total inventory count for
antenna<n>
antenna<n>
Antenna<n>ReadCount
Indicates the number of tags read at
antenna<n> that matched the configured filters.
antenna<n> that matched the configured filters.
Antenna<n>FailedReadCount
Indicates the number of tags where a read was
attempted at antenna<n> because the tag
matched the configured filter, but the read
failed.
attempted at antenna<n> because the tag
matched the configured filter, but the read
failed.
Table 3.2 shows a sample of the available RFID statistics. For the full list as well as syntax
details, see the RShell Reference Manual.
details, see the RShell Reference Manual.