Impinj Inc. XARRAY 사용자 설명서
Speedway Revolution Installation and Operations Guide Octane 4.11
Chapter 2: Installing and Connecting
Chapter 2: Installing and Connecting
8
Revision 4.11 Copyright ©2014, Impinj, Inc.
Chapter 2: Installing and Connecting Speedway
Revolution
Revolution
This chapter provides details about the Speedway Revolution I/O ports and status LEDs, and
explains how to install the Reader and connect it to your network.
explains how to install the Reader and connect it to your network.
Speedway Revolution Ports and LEDs
The following graphic illustrates the I/O ports located on the Speedway Revolution Reader.
This graphic illustrates a Speedway R420, which includes four antenna ports visible in Figure
2.2.
This graphic illustrates a Speedway R420, which includes four antenna ports visible in Figure
2.2.
Note
: Both Speedway R420 and R220 models have the same exterior ports with one
exception; the R220 includes two antenna ports and the Speedway R420 includes four
antenna ports.
antenna ports.
Figure 2.1 Speedway Revolution R420 Port Connections
Note
: See Appendix B
specifications and details for each pin of the GPIO DE-15 connectors on page 51.
Antenna ports and LED status indicators are located on the back panel of the Reader. The
Speedway R420 graphic below illustrates their locations:
Antenna ports and LED status indicators are located on the back panel of the Reader. The
Speedway R420 graphic below illustrates their locations:
Figure 2.2 Speedway Revolution R420 Antenna Ports and Status LEDs
Default Restore
button
button
USB (Full
Speed) Device
(for future use)
Speed) Device
(for future use)
Console
RJ-45 connector
(RS-232)
RJ-45 connector
(RS-232)
USB (Full
Speed) Host
(for future use)
Speed) Host
(for future use)
+24Vdc locking
connector powered
via external power
connector powered
via external power
10/100 base-T Ethernet
(Power over Ethernet)
(Power over Ethernet)
GPIO DE-15
4 inputs, 4 outputs
with serial RS-232
4 inputs, 4 outputs
with serial RS-232
Four RP-TCN RF antenna connectors (R420)
(R220 has two antenna connectors)
(R220 has two antenna connectors)
Reader
Status LED
Status LED
Antenna 4 and
its status LED
its status LED
Antenna 3 and
its status LED
its status LED
Antenna 2 and
its status LED
its status LED
Antenna 1 and
its status LED
its status LED
Power status
LED
LED