Philips Innovative Applications 314113000291 사용자 설명서
Partners in Wireless Audio
Step 7: Use the Stereo-RCA cable that has a 3.5mm stereo plug on one end, whereas the
Left + Right RCA plugs on the other end, shown in figure 2b and figure 1.5.
Figure 2b Stereo-RCA Cable
RCA Plugs
Left (White)
Right (Red)
Left (White)
Right (Red)
Stereo plug
Step 8: Connect the stereo plug of the Stereo-RCA cable to an audio source.
(Example of audio source: MP3 Player, Notebook/PC or DVD/CD Player)
Step 9: Connect the RCA plugs of the Stereo-RCA cable to the RCA jacks of the CU.
Left (White) plug to Left A jack.
Right (Red) plug to Right A jack.
Right (Red) plug to Right A jack.
Step 10: Check that the Link LEDs light up at the CU and MU.
If no audio source is provided to the CU, the Link LEDs will turn off after 5 seconds.
Step 11: Connect a stereo headphone or speaker to the MU headphone 3.5mm stereo jack.
Step 12: Play music at the audio source and listen from the headphone or speaker.
Step 13: Press Volume Up/Down buttons to adjust the audio volume.
Step 12: Play music at the audio source and listen from the headphone or speaker.
Step 13: Press Volume Up/Down buttons to adjust the audio volume.
The CU provides the master volume control to all the MUs.
The MU provides the local or slave volume control only to the MU.
The AT8 LED will light up at CU and MU when Volume Up/Down button is pressed.
The MU provides the local or slave volume control only to the MU.
The AT8 LED will light up at CU and MU when Volume Up/Down button is pressed.
Step 14: Move around to experience the wireless capability and robustness of our product.
Notes
1:
If you hear fuzzy noises or breaks before you walk more than 5 metres between the CU
and MU, this indicates that either your 4-AA battery pack is running low.
If the Power On LED looks dim or fading, please replace DC source.
and MU, this indicates that either your 4-AA battery pack is running low.
If the Power On LED looks dim or fading, please replace DC source.
2:
If you hear distortion and the Link LED is off, the MU fails to link wirelessly to the CU.
This indicates that either the range is exceeded or there is a huge interference.
You can move around or closer to the CU. The MU will automatically re-link to the CU.
This indicates that either the range is exceeded or there is a huge interference.
You can move around or closer to the CU. The MU will automatically re-link to the CU.
3:
If all the 3 RF LEDs blinks together at every 3 seconds, this indicates that the FFC cable
connection is loose.
connection is loose.
9