Oticon A/S AUMRTE 사용자 설명서
PEOPLE FIRST
Oticon Radio Model - Quick Installation Guide
Radio Model Name:
Aurora mini RITE-T
Oticon A/S
Main +45 39 17 71 00
Main +45 39 17 71 00
Kongebakken 9
Fax +45 39 27 79 00
Fax +45 39 27 79 00
DK-2765 Smørum
Denmark
Denmark
www.oticon.com
CVR-no. 42334219
CVR-no. 42334219
3
On the bottom side of the main PCB of the Aurora mini RITE-T radio model the connector for the speaker unit assembly (where the wire antenna for the Bluetooth
radio is an integrated part), the programming connector, EEPROM memory and coil antenna for the 3.84 MHz radio can be seen:
radio is an integrated part), the programming connector, EEPROM memory and coil antenna for the 3.84 MHz radio can be seen:
The most important parts inside the Engine module are a Digital-Signal-Processor (DSP), a radio Front-End (FE) chip for the 3.84 MHz radio part and an RF chip
for the Bluetooth radio part – all mounted on a small rigid PCB again mounted on the main flex PCB. The Aurora mini RITE-T radio model also includes all voltage
regulators and
for the Bluetooth radio part – all mounted on a small rigid PCB again mounted on the main flex PCB. The Aurora mini RITE-T radio model also includes all voltage
regulators and
buffered data programming inputs on board
. The DSP is the main processor controlling the functionality of both radios in the Aurora mini RITE-
T radio model.
The Aurora mini RITE-T radio model is intended to be installed in Oticon, Bernafon, Sonic and affiliated wireless hearing aid devices of the mini RITE-T (Receiver-
In-The-Ear) wearing style.
In-The-Ear) wearing style.
Aurora mini RITE-T Radio Model – Main PCB – Bottom side