Geonautics International Pte Ltd 30-0710 사용자 설명서
TAG-T3 Wombat – User Guide, 1.0.7
Commands
4.8
GPS
4.8.1 GPS (Configuration)
Specifies the GPS operational parameters.
$GO0,,GPS[,<Interval>][,<Force Logs>][,<Power Management>]
$GOA,<Unit_Id>,GPS,<Interval>,<Force Logs>,<Power
Management>
GPS Command
Description
Interval
Number of seconds between
commencing a GPS log
commencing a GPS log
0
Positions only logged while moving
Force Logs
1
Force positions to be logged
0
GPS ON always
1
2
GPS ON when movement sensed
Power Management
3
GPS turns off between logs but
ignores timeouts if motion is detected
ignores timeouts if motion is detected
Table 17, GPS (Configuration) Command
Default:
$GO0,,GPS,30,0,3
Example:
$GO0,,GPS,60,1,3
Returns:
$GOA,<Unit_Id>,GPS,60,1,3
Setting the GPS interval to zero, forces the GPS to be permanently off.
The GPS will also come on as required to perform real-time tracking.
If Interval is set to zero (0), GPS is turned OFF and will not turn on
when movement is sensed. Only experienced users should consider
using this option.
© Geonautics
37
Law Enforcement ONLY