Geonautics International Pte Ltd 30-0710 사용자 설명서
Wombat – User Guide, 1.0.7
APPENDIX A
APPENDIX A
EXTERNAL RELAY TRIGGERING
An internal short to power ground can be utilized, so that an external
relay can be triggered to ENABLE / DISABLE 3
relay can be triggered to ENABLE / DISABLE 3
rd
party devices. The
internal 6 Pin Datamate Connector, page 49, is used to connect the
external relay to the
external relay to the
TAG-T3. This output is protected internally by a
0.25A fuse. To trigger the external relay when connected, the
command $GO0,,RLY (page
command $GO0,,RLY (page
), is used. Wiring examples can be
found below.
Figure 11, To DISABLE External Devices using the TAG-T3
Figure 12, To ENABLE External Devices using the TAG-T3
© Geonautics
48
Law Enforcement ONLY