Q Global Solutions Electronics Corp. QGS300181406 사용자 설명서
visual effect (on top left); if camera is not connected, Monitor will show black background
and display GUI visual effect in he center. GUI doesn't function in "D" or "N" gear.
and display GUI visual effect in he center. GUI doesn't function in "D" or "N" gear.
4.2.2. For 2-sensor operation mode, sensors are supposed to be
connected to port CL/CR on FS unit, GUI will display two central sensors' pattern. GUI
doesn't support 3-sensor mode.
4.3 Sensor-diagnosis
Once activated, GUI-OSD unit starts its diagnosis for sensor:
1. each beep stands for one defective sensor.
2. low pitch sound is for front sensors; while high pitch sound is for rear sensors;
3. when both front and rear sensors are connected, front sensor diagnosis is conducted
first.
4. Note: if sensors only connects to CL/CR ports, FS unit will view this situation as 2-sensor
operation mode and won't deliver defective warning beeps.
1. each beep stands for one defective sensor.
2. low pitch sound is for front sensors; while high pitch sound is for rear sensors;
3. when both front and rear sensors are connected, front sensor diagnosis is conducted
first.
4. Note: if sensors only connects to CL/CR ports, FS unit will view this situation as 2-sensor
operation mode and won't deliver defective warning beeps.
4.4 Detection Sections
There will be at most six curves showed on the screen, their section is
180-150-120-90-60-40-00 (in cm), .
When an object is detected, system will deliver alarming sound as well as graphic warning
by showing the curves on the screen.
Sound alarm:
- As obstacle gets closer, system delivers higher frequency alarms, the beep becomes solid
sound when it get closer than 60cm.
- Low pitch for front sensors, high pitch for rear sensors.
180-150-120-90-60-40-00 (in cm), .
When an object is detected, system will deliver alarming sound as well as graphic warning
by showing the curves on the screen.
Sound alarm:
- As obstacle gets closer, system delivers higher frequency alarms, the beep becomes solid
sound when it get closer than 60cm.
- Low pitch for front sensors, high pitch for rear sensors.
4.5 Switch Function
Switch 1: