Public Wireless Inc CM200D01 사용자 설명서
38 / 54
GSM Spectrum View Window
Center CH: GSM CH for center freq. of 25MHz band
Num CH: Number of GSM CH currently dectected
FAs: GSM CH of spectrum displayed “GSM spectrum
detected” window
detected” window
WCDMA FA1~FA3: Currently set WCDMA FA CH.
On/Off: Status/control the operation state of HPA
OVTMP: Alarm status of HPA Over-temperature
OVPWR: Alarm status of HPA Over-Power
VSWR: Alarm status of HPA VSWR
OUT PWR: Output power level of HPA(box)
OUT UPR: Display/control of upper threshold of HPA output
power(button), alarm status(LED)
power(button), alarm status(LED)
OUT LWR: Value/control of lower threshold of HPA output
power(button), alarm status(LED)
power(button), alarm status(LED)
ALC: Set ALC level for HPA output, and shows ALC on/off
status of function(LED).
status of function(LED).
ASD(Auto Shutdown): ASD level(button), and shows ASD
on/off status of function(LED).
on/off status of function(LED).
Protection On/Off: In order to protect RU from over input
RVS(Rx) signal power. In case that input signal is more than
IN UPR level, RU shuts down and LED is changed to
RVS(Rx) signal power. In case that input signal is more than
IN UPR level, RU shuts down and LED is changed to
RED
.
Pilot On/Off: Sets CW signal generation, and shows its
status. It is used for RVS gain setting.
status. It is used for RVS gain setting.
IN PWR: RVS power value at the LNA output point
IN UPR: Sets RVS input upper threshold, and shows the
alarm status of input upper threshold.
alarm status of input upper threshold.
OUTPWR: RVS RF output power of RRBS(RRCHS)
ATT: Sets ATT to control RVS gain, and shows it’s value.
Center Freq: It indicates pilot signal frequency value. This
value changes with FWD(Tx) center frequency automatically.
value changes with FWD(Tx) center frequency automatically.