Mitac Digital Technology Corporation LBU02 사용자 설명서

 

For Windows 98 / 2000 / Me / XP operating system, make sure that the USB
device driver is installed on your computer.

4.3  Configuration Problem

 

Use the Monitor utility of your Configuration & Monitor Application
utility to check the Link Quality of your WLAN USB Dongle with the AP it
is associated with (Infrastructure mode) or with other wireless station(s)
(Ad-Hoc mode).

 

Use the Site Survey utility of your Configuration & Monitor Application
utility to check if there is high interference around the environment.

4.4  Access Point Problem (Infrastructure Mode)

 

Make sure that the Access Point that your WLAN USB Dongle is associated
with is powered on and all the LEDs are working properly.

 

Reconfigure and reset the Access Point.

 

Use the Web Manager / Telnet of the Access Point to check whether it is
connected to the network.

4.5  Communication Problem

The WLAN USB Dongle cannot communicate with the computer in the
Ethernet when Infrastructure mode is configured.

 

Make sure that the Access Point your WLAN USB Dongle is associated
with is powered on.

 

Use the Site Survey utility of the Configuration & Monitor Application
utility to verify if the operating radio channel is in good quality. Or, change
the Access Point and all the wireless station(s) within the BSSID to another
radio channel.