dreamGEAR Radium, PS3 DGPS3-1384 전단

USER’S GUIDE

PACKAGE CONTENTS:
• Radium Wireless Controller
• Radium USB Receiver
• User’s Guide/Warranty Card
• Registration Card

SET-UP:
1. Open the battery compartment located on the bottom side of 

the Radium Wireless Controller. Insert 3 “AAA” batteries. 
Replace battery compartment cover.

NOTE: “AAA” batteries not included. Also, make sure that you use 
fresh batteries when playing with the Radium Wireless Controller.
2. The Radium Wireless Controller features an ON/OFF switch 

located on the bottom side of the controller. Switch the control-
ler to ON.

3. With the PlayStation 3 console powered ON, plug the Radium 

USB Receiver into one of the USB ports located on the front of 
the PlayStation 3. The 4 channel indicator lights on the front of 
the Radium Wireless Controller will flash slowly. 

4. Press the Connect button on the Radium USB Receiver. The 

LED on the receiver will flash rapidly.

5. Press the Menu button located on the front of the Radium 

Wireless Controller. The 4 channel indicators will flash rapidly. 
Press the Menu button again and the controller will be set to the 
appropriate channel. The solid LED will indicate which player 
position the controller is set to, Player 1, Player 2, etc.

6. To connect multiple Radium Wireless Controllers, connect each 

controller separately. First, connect Player 1’s controller and 
then connect the remaining controllers, one by one.

TURBO FUNCTION:
1. To activate Turbo, press any button and the Turbo button 

(located above the 4 channel indicator lights) at the same time 
to set Turbo to that specific button. 

2. To cancel the Turbo function, repeat Step 1.

SLEEP MODE:
The Radium Wireless Controller features a Sleep Mode. The 
Radium Wireless Controller will enter Sleep Mode if one of the 
following occurs:
1. If the controller loses contact with the receiver for more 30 

seconds.

2. 5 minutes of analog stick or button inactivity
To turn the controller on from being on Sleep Mode, simply move 
the analog stick or press a button on the controller.

LOW BATTERY INDICATOR:
When the batteries in the Radium Controller are lower than the 
standard amount needed, the LED on the 4 channel indicator 
lights will flash 4 times/second. If this occurs, please remove the 
old batteries and replace them with fresh batteries.

SIXAXIS™ TECHNOLOGY:
The Radium Wireless Controller features Sixaxis™ technology, 
allowing it to detect natural, real-time movements, along with input 
via pressure sensitive buttons, analog sticks and triggers.
The Sixaxis function only works with Sixaxis compatible software. 
Sixaxis must be enabled in the “Options” menu of a compatible 
PlayStation 3 game. 
NOTE: Please refer to the game’s User’s Guide for information on 
the how to use the Sixaxis technology with that specific game.