Eastman Kodak Company PUL730 사용자 설명서
16
www.kodak.com/go/support
Doing more with your frame
Upgrade your frame
1 Remove the memory card or USB flash drive from your computer, then insert it into
the frame.
The Install Firmware screen appears on your frame. This screen only appears when the
firmware upgrade file (IMG) is present on the card or device.
firmware upgrade file (IMG) is present on the card or device.
2 Highlight the newer firmware version, then press OK
to begin the upgrade.
IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive
during the upgrade!
When the upgrade is complete, your frame automatically restarts. If it doesn’t, turn the
frame off, then back on.
frame off, then back on.
Maintaining your frame
IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning
solutions, or other adhesives on the frame or any of its parts.
Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on
the frame, apply light pressure.
the frame, apply light pressure.