RadioFrame Networks Inc DH2 사용자 설명서

Method of Procedure 
Connecting to the Customer LAN 

RFN_3.1 Beta

 

The SSID you enter must be a valid SSID that is recognized by System 
Manager.  

3  For Channel, type 1, 6, or 11 to specify the channel to be used by the RAP. 

At the time of shipment, all RAPs are set to Channel 6 by default. Channel 
numbers can only be changed at the RAP level—channels cannot be 
changed using global settings. If a 3-channel frequency plan is implemented, 
RFN recommends using channels 1, 6, and 11 (in countries where these 
channels are permitted).  

4  Select ‘Save Changes’ to save the SSID and Channel settings. 

5  When WEP Encryption is disabled or “Off”, all other items related to WEP 

encryption are disabled (WEP Keys and Shared Key Authentication). When 
“On”, a WEP Key other than the globally configured WEP key can be 
selected. Also, Shared Key Authentication can be enabled or disabled, 
“checked” or “unchecked” respectively. For more information about Shared 
Key Authentication, refer to section 6.2.2.2 Shared Key Authentication. 

RFN recommends that RAP WEP Encryption settings be set globally rather 
than individually.  

RAP WEP Encryption changes remain until changes are made to the global 
802.11 settings.  

6 Statistics lists information about the functioning of the RAP, including: 

 

Transmitted Frames 

Number of frames transmitted by the RAP 

Received Frames 

Number of frames received by the RAP 

FCS Errors 

Number of FCS errors 

WEP Undecryptable Frames 

Number of frames that could not be unencrypted 

Transmit Failed 

Number of failed transmissions 

Multiple Retries 

Number of retries attempted 

IP Address 

IP address of the RAP 

MAC Address 

MAC address of the RAP 

 

7  For Enhanced Security, select either “On” or “Off”, and then select Save 

Changes.