Honeywell International Inc. WFSLCDUI 사용자 설명서
34
PRELIMINARY: Firelite Wireless Sensor Network P/N LS10036-000FL-E:N0 10/10/2013
W-GATE
Operations
2.7.7 Silence Network Command
The silence network command is a diagnostic function to turn off all radio communication from the
wireless devices for the set amount of time. All devices will retain the profile information but will
be removed from the mesh. The devices will not send or receive any wireless communication until
the set time expires or the device is rebooted. The mesh network can be reformed at the end of the
silence period or after the device is restarted.
wireless devices for the set amount of time. All devices will retain the profile information but will
be removed from the mesh. The devices will not send or receive any wireless communication until
the set time expires or the device is rebooted. The mesh network can be reformed at the end of the
silence period or after the device is restarted.
CAUTION:
FIRE PROTECTION FROM WIRELESS DEVICES WILL BE LOST WHEN A
SILENCE COMMAND IS ISSUED
The mesh network can be silenced using the PC-based configuration tool.
Silencing Mesh Network Using PC Tools
To silence the mesh network using the PC based configuration tool, perform the following steps:
1.
Connect the W-USB dongle device to your computer. For more information on USB dongle,
refer to Section 5:, "USB Adapter".
refer to Section 5:, "USB Adapter".
2.
Launch the PC tools application. Refer to Appendix B:, "PC tools" to know about launching
the PC tools application.
the PC tools application.
3.
Go to Diagnostics step.
4.
Select a Gateway from the communicator pane.
5.
Click View Mesh. The mesh is displayed.
6.
Click Advanced Functions
on top of the mesh display. A dropdown list is
displayed.
7.
Click Silence Devices. The Silence mesh network screen is displayed.
8.
Select the time interval to silence the wireless devices from the dropdown list and click Yes.