IKUSI ELECTRONICA S.L. TR800-US 사용자 설명서
ANNEX B.- PROGRAMMING THE MACHINE IDENTIFICATION IN LCD TRANSMITTERS.
Transmitters with the LCD display option allow the operator to programme a machine
identification label of up to 24 text characters. This identification displays on transmitter start-
up.
This text must identify the machine with a that is commonly known by the workmen. When
first starting the transmitter you can edit/introduce this text as follows;
first starting the transmitter you can edit/introduce this text as follows;
1. Introduce a battery and turn the ON/OFF
key to ON.
2. Push in and then extract the STOP
button and you will observe the LED
pulse orange followed by green pulses.
pulse orange followed by green pulses.
3. Press pushbutton 4 to the second step
and then push the START button. Keep
both pressed together for 2 seconds and
then you will enter the ‘EDITING’ mode.
both pressed together for 2 seconds and
then you will enter the ‘EDITING’ mode.
4. Once you have entered into ‘EDITING’
mode, there appears in the display the
text "CRANE ??" in which the first
character blinks. From this point you can
edit the name of the machine by means
of the push buttons 1 to 4, whose
functions are described as follows;
text "CRANE ??" in which the first
character blinks. From this point you can
edit the name of the machine by means
of the push buttons 1 to 4, whose
functions are described as follows;
Pushbutton 1: To move for the list of established characters in descending order.
Pushbutton 2: To move for the list of characters established in ascending order.
Pushbutton 3: To return to the previous character in the display.
Pushbutton 4: To validate the published character and move to the following one,
(towards the right hand)
5. Push START to store the edited text. LCD will show the message “SAVED” for 2
seconds.
6. Once the last character has been edited, you exit the ‘EDITING’ mode by pressing
the STOP.
TM70Bi.v2.1a.doc (06/04)
15