Wilson Electronics LLC 271247ASB 사용자 설명서
3
1 Select a location to install the amplifi er that is away from excessive heat, direct
sunlight and moisture.
2 Select a location on the roof of the building to install the outside antenna. Use
a cell phone in test mode to fi nd the strongest signal from the cell tower. Visit
wilsonelectronics.com to fi nd test mode function for your particular cell phone.
wilsonelectronics.com to fi nd test mode function for your particular cell phone.
3 Select a location for the inside antenna, preferably in the center of where the
signal needs to be amplifi ed.
4 Verify that both the outside antenna and the inside antenna are connected
before powering up the amplifi er.
Lightning protection is recommended for all in-building installations.
Typical Installation
EASY TO INSTALL
Wilson Electronics designs and manufactures a full range of wireless
amplifi ers for in-building applications.
amplifi ers for in-building applications.
The following steps provide a summary of the amplifi er/antenna installation
process. However, they are not a substitute for the complete installation
instructions on the following pages, which you should read thoroughly. Contact
Wilson’s Technical Support Department with any questions at 866-294-1660.
process. However, they are not a substitute for the complete installation
instructions on the following pages, which you should read thoroughly. Contact
Wilson’s Technical Support Department with any questions at 866-294-1660.
Power
Supply
Supply
DT Wireless
Amplifer
Amplifer
Inside Antenna
1
2
3
Warning: See RF safety
warning on page 6.